Connecting a router

Setting up the router

Setting up a router on L2TP

Setting up a router on IPOE

Setting up a router on L2TP

4. « Home Internet»
"Wi-Fi network of the router"
"Guest Wi-Fi network"

Setting up a router on IPOE

1. Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

2. The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

3. You will be taken to the main menu of the router. Select an item Quick setup.

4. "Home Internet"
"Wi-Fi network of the router"- here you can configure your router's wireless network. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
"Guest Wi-Fi network"- here you can configure the guest wireless network of your router.
"Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you are browsing broadcast channels on your computer or using the Xbox 360 console, then you don’t need to configure anything.
To save the settings you entered, click the Save button.

Fill out the form:


Click the Login button.

Firmware update

Reset settings

Firmware update

2.0.38: (14.7 MB)

Reset settings

MCPE

Connecting a router

Connect the cable that our installers installed in your apartment to the Internet (WAN) port, and connect your computer to any of the Ethernet (LAN) ports. You can also connect your PC to the router via wireless network, but at the initial setup stage it is better to use a cable.

Setting up the router

Setting up a router on L2TP

Setting up a router on IPOE

Setting up a router on L2TP

1. Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

2. The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

3. You will be taken to the main menu of the router. Select Quick Setup.

4. "Home Internet"- in this section you configure the connection to the Beeline network. All configuration data necessary for connection is already contained in the router’s memory; you just need to enter your username and password in the appropriate fields.
"Wi-Fi network of the router"- here you can configure your router's wireless network. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
"Guest Wi-Fi network"- here you can configure the guest wireless network of your router.
"Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you view over-the-air channels on your computer or using an Xbox 360 console, then you don't need to configure anything.
To save the settings you entered, click the Save button.

Setting up a router on IPOE

1. Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

2. The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

3. You will be taken to the main menu of the router. Select Quick Setup.

4. "Home Internet"- in this section you need to enter any number or letter in the “Login” and “Password” fields (the setting does not affect anything).
"Wi-Fi network of the router"- here you can configure your router's wireless network. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
"Guest Wi-Fi network"- here you can configure the guest wireless network of your router.
"Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you view over-the-air channels on your computer or using an Xbox 360 console, then you don't need to configure anything.
To save the settings you entered, click the Save button.

6. Launch the browser, open the page http://login.beeline.ru
Fill out the form:
Login - indicate your personal account number (type 0891234567);
Password - enter a password to access the Internet;
Click the Login button.

Firmware update and factory reset

Firmware update

Reset settings

Firmware update

Be careful when following the instructions in this section. In case of an error in the actions, a visit to the service center will be required to restore the device.

1. Download the firmware. Current firmware version - 2.0.22: (14.5 MB)

2. Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

3. The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

4. Click on the “Advanced Settings” button.

5. In the top menu, select “Others”.

6.A page with the basic settings of the router will open. In the left menu, select “Software Update”. Click the "Select File" button and specify the location of the firmware file that you downloaded earlier.

7. After that, click the “Perform update” button.

8. Wait while the router performs a firmware update, this process takes approximately 5 minutes, after which the router must be rebooted and it will be ready for use.

Reset settings

Use a hard reset if you need to configure the device again (delete all user settings), there is no access to the web page of the router settings interface, after setting up the router, the Internet connection was not established or the access password was lost.

Attention! When executing hard reset settings all custom settings will be reset to factory settings!

There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

To reset the router to factory settings, follow these steps: Turn on the power to the router and wait until the device boots up completely. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button. After this, the router will reboot with default settings (factory settings) and will need to be configured again.

You can also reset the setting through the MCPE platform

Or through the router's web interface. Click on the "Revert to factory default settings" button.

Connecting a router

Connect the cable that our installers installed in your apartment to the Internet (WAN) port, and connect your computer to any of the Ethernet (LAN) ports. You can also connect your PC to the router via a wireless network, but at the initial setup stage it is better to use a cable.

Setting up the router

Setting up a router on L2TP

Setting up a router on IPOE

Setting up a router on L2TP

1. Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

2. The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

3. You will be taken to the main menu of the router. Select Quick Setup.

4. "Home Internet"- in this section you configure the connection to the Beeline network. All configuration data necessary for connection is already contained in the router’s memory; you just need to enter your username and password in the appropriate fields.
"Wi-Fi network of the router"- here you can configure your router's wireless network. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
"Guest Wi-Fi network"- here you can configure the guest wireless network of your router.
"Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you view over-the-air channels on your computer or using an Xbox 360 console, then you don't need to configure anything.
To save the settings you entered, click the Save button.

Setting up a router on IPOE

1. Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

2. The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

3. You will be taken to the main menu of the router. Select Quick Setup.

4. "Home Internet"- in this section you need to enter any number or letter in the “Login” and “Password” fields (the setting does not affect anything).
"Wi-Fi network of the router"- here you can configure your router's wireless network. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
"Guest Wi-Fi network"- here you can configure the guest wireless network of your router.
"Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you view over-the-air channels on your computer or using an Xbox 360 console, then you don't need to configure anything.
To save the settings you entered, click the Save button.

6. Launch the browser, open the page http://login.beeline.ru
Fill out the form:
Login - indicate your personal account number (type 0891234567);
Password - enter a password to access the Internet;
Click the Login button.

Firmware update and factory reset

Firmware update

Reset settings

Firmware update

Be careful when following the instructions in this section. In case of an error in the actions, a visit to the service center will be required to restore the device.

1. Download the firmware. Current firmware version - 2.0.15: (22.2 MB)

2. Open your browser and enter 192.168.1.1 in the address bar. You will be taken to a welcome page. Click Continue.

3. The router will prompt you to enter your username and password. Enter admin in the first field, and admin in the second. Click Continue.

4. Click on the “Advanced Settings” button.

5. In the top menu, select “Others”.

6.A page with the basic settings of the router will open. In the left menu, select “Software Update”. Click the "Select File" button and specify the location of the firmware file that you downloaded earlier.

7. After that, click the “Perform update” button.

8. Wait while the router performs a firmware update, this process takes approximately 5 minutes, after which the router must be rebooted and it will be ready for use.

Reset settings

Use a hard reset if you need to configure the device again (delete all user settings), there is no access to the web page of the router settings interface, after setting up the router, the Internet connection was not established or the access password was lost.

Attention! When performing a hard reset, all user settings will be reset to factory settings!

There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

To reset the router to factory settings, follow these steps: Turn on the power to the router and wait until the device boots up completely. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button. After this, the router will reboot with default settings (factory settings) and will need to be configured again.

You can also reset the setting through the MCPE platform

Or through the router's web interface. Click on the "Revert to factory default settings" button.

Connecting a router

Connect the cable that our installers installed in your apartment to the Internet (WAN) port, and connect your computer to any of the Ethernet (LAN) ports. You can also connect your PC to the router via a wireless network, but at the initial setup stage it is better to use a cable.

Setting up the router

Setting up a router on L2TP

Setting up a router on L2TP

"Home Internet"- in this section you configure the connection to the Beeline network. All configuration data necessary for connection is already contained in the router’s memory; you just need to enter your username and password in the appropriate fields.

"Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you view over-the-air channels on your computer or using an Xbox 360 console, then you don't need to configure anything.
"Router Security"
To save the settings you entered, click the Save button.

Firmware update and factory reset

Firmware update

Reset settings

Firmware update

First, determine the revision of the router!

1. Revision B1/B2/B3 with firmware versions from 1.2.100 to 1.2.119: current firmware 1.2.120
If the router revision B1/B2/B3 has a software version lower than 1.2.100 (1.2.99 and lower), then you need to update first to 1.2.100, THEN to the current firmware 1.2.120
For revision B5/B6, you need to update to firmware 1.2.254, then to the newer 1.2.255

2. Router D-Link DIR 300/NRU revision B1/B2/B3/B5/C1 works correctly on the Beeline network only with specially developed firmware from D-Link. This firmware has been optimized by D-Link specialists to work on our network.
If you have D-Link router DIR 300/NRU revision B1/B2/B3/B5/C1 with factory firmware, you can update the firmware to customized one at the nearest D-Link service center, the update procedure is free, you will need the device itself and a valid subscription agreement.
Please note that services for restoring unsuccessfully flashed routers and returning from customized firmware to factory firmware are provided at the D-Link Service Center on a paid basis.
For routers revision C1, after a successful firmware update, you need to reset the router by pressing the RESET button on the side panel for 30 seconds. After this, perform the standard router setup.
Do not install firmware for DIR-300/NRU hardware revisions B1, B2, B3 on a DIR-300/NRU router with hardware revision B5. This leads to the router not working.

3. Open your browser and enter 192.168.1.1 in the address bar. The router will prompt you to enter your username and password. Enter admin in both fields. Click OK.

5. On the left side of the menu, go to the “System” section, then the “Software Update” subsection. Click on the “Select file” button and in the window that appears, select the file with the firmware. Click the "Update" button.

6. Wait while the router updates the firmware and reboots, this process may take up to 5 minutes. During this time, do not unplug the router from the power supply.

Reset settings

Use a hard reset if you need to configure the device again (delete all user settings), there is no access to the web page of the router settings interface, after setting up the router, the Internet connection was not established or the access password was lost.

Attention! When performing a hard reset, all user settings will be reset to factory settings!

There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

To reset the router to factory settings, follow these steps: Turn on the power to the router and wait until the device boots up completely. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button. After this, the router will reboot with default settings (factory settings) and will need to be configured again.

4. You will be taken to the router quick setup page. Click on the "Advanced Settings" button.

D150L

Connecting a router

Connect the cable that our installers installed in your apartment to the Internet (WAN) port, and connect your computer to any of the Ethernet (LAN) ports. You can also connect your PC to the router via a wireless network, but at the initial setup stage it is better to use a cable.

Setting up the router

Setting up a router on L2TP

Setting up a router on L2TP

Open your browser and enter 192.168.1.1 in the address bar. The router will prompt you to enter your username and password. Enter admin in the first field and 1234 in the second. Click OK.

You will be taken to the router quick setup page. It consists of three sections, let’s look at the purpose of each of them:
"Home Internet"- in this section you configure the connection to the Beeline network. All configuration data necessary for connection is already contained in the router’s memory; you just need to enter your username and password in the appropriate fields.
“My Wi-Fi network” - here you can configure your router’s wireless network. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
"Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you view over-the-air channels on your computer or using an Xbox 360 console, then you don't need to configure anything.
"Router Security"- here you can change the password to access your router.
To save the settings you entered, click the Save button.

After clicking the Save button, it will take approximately 1 minute for the router to establish a connection.
As soon as the router establishes a connection, you will see “Internet connected” opposite the Status line. Congratulations, you have fully configured your router to work on the Beeline network.

Firmware update and factory reset

Firmware update

Reset settings

Firmware update

Be careful when following the instructions in this section. In case of an error in the actions, a visit to the service center will be required to restore the device. It is recommended to flash the router by connecting the cable from the PC to any of the LAN ports. When flashing a router via Wi-Fi, there is a risk of getting an inoperative device that can only be restored in a service center, or cannot be restored at all.

1. Open your browser and enter 192.168.1.1 in the address bar. The router will prompt you to enter your username and password. Enter admin in both fields. Click OK.

2. You will be taken to the router quick setup page. Click on the "Advanced Settings" button.

3. On the left side of the menu, go to the “System” section, then the “Software Update” subsection. Click on the “Select file” button and in the window that appears, select the file with the firmware. Click the "Update" button.

4. Wait while the router updates the firmware and reboots, this process may take up to 5 minutes. During this time, do not unplug the router from the power supply.

Reset settings

Use a hard reset if you need to configure the device again (delete all user settings), there is no access to the web page of the router settings interface, after setting up the router, the Internet connection was not established or the access password was lost.

Attention! When performing a hard reset, all user settings will be reset to factory settings!

There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

To reset the router to factory settings, follow these steps: Turn on the power to the router and wait until the device boots up completely. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button. After this, the router will reboot with default settings (factory settings) and will need to be configured again.

You can also reset via the router's web interface. Open your browser and enter 192.168.1.1 in the address bar. The router will prompt you to enter your username and password. Enter admin in both fields. Click OK.

4. You will be taken to the router quick setup page. Click on the "Advanced Settings" button.

5. On the left side of the menu, go to the “System” section, then the “Configuration” subsection. Click the "Factory Reset" button.

N150L

Connecting a router

Connect the cable that our installers installed in your apartment to the Internet (WAN) port, and connect your computer to any of the Ethernet (LAN) ports. You can also connect your PC to the router via a wireless network, but at the initial setup stage it is better to use a cable.

Setting up the router

Setting up a router on L2TP

Setting up a router on L2TP

1. Open your browser and enter 192.168.1.1 in the address bar. The router will prompt you to enter your username and password. Enter admin in the first field and 1234 in the second. Click OK.

2. You will be taken to the router quick setup page. It consists of three sections, let’s look at the purpose of each of them:
"Home Internet"- in this section you configure the connection to the Beeline network. All configuration data necessary for connection is already contained in the router’s memory; you just need to enter your username and password in the appropriate fields.
“My Wi-Fi network” - here you can configure your router’s wireless network. In the Network name field, enter the name of your network, for example my_wifi, and in the Password field, enter the password to access it. Please note that the password must contain at least 8 characters.
"Beeline" TV - if you have activated the "Beeline" TV service, you need to select the router port to which you will connect the set-top box. If you view over-the-air channels on your computer or using an Xbox 360 console, then you don't need to configure anything.
"Router Security"- here you can change the password to access your router.
To save the settings you entered, click the Save button.

Attention! When performing a hard reset, all user settings will be reset to factory settings!

There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

To reset the router to factory settings, follow these steps: Turn on the power to the router and wait until the device boots up completely. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button. After this, the router will reboot with default settings (factory settings) and will need to be configured again.

You can also reset via the router's web interface. Open your browser and enter 192.168.1.1 in the address bar. The router will prompt you to enter your username and password. Enter admin in both fields. Click OK.

4. You will be taken to the router quick setup page. Click on the "Advanced Settings" button.

5. On the left side of the menu, go to the “System” section, then the “Configuration” subsection. Click on the "Reset" button.

Wi-Fi router "Beeline"

3. Connection type – select L2TP IP address/Server name – enter tp.internet.beeline.ru Username – enter your login Password – enter your password Address type – select dynamic MTU – enter 1460 Mark the line “get DNS automatically” with a circle. Click the "Save Changes" button.

any numbers;

Setting up a router on IPOE

1. Open your browser and enter 192.168.10.1 in the address bar. The router will prompt you to enter your username and password. Enter admin in both fields. Click OK.

2. You are taken to the web interface of the router, let’s start setting up the connection, to do this, in the “Basic settings” section, click on the “WAN” item.

3. Connection type – Dynamic IP. Or you can perform a factory reset before configuring, then configure only wifi network. Click the "Save Changes" button.

4. Wait until the router saves the settings, it usually takes 1-2 minutes, after which you will see the message “Changing settings was successful”, click the “OK” button. Wait a few seconds, the router will automatically establish a connection to the Internet.

5. Select menu " Wi-Fi setup", a page will open with basic setup router:
“Turn off the wireless network” - do not check the box if you want to use Wi-Fi
“Standard” – select 2.4GHz (B+G)
“Mode” – make sure “AP” is selected
“Wireless Network Name” – enter the name of your wireless network, for example My_WiFi
“Channel number” – set to “Auto”
Now click the “Save Changes” button.
Wait a few seconds while the router saves the changes. The wireless network is almost ready to use.

6. To protect your wireless network from intruders or unscrupulous neighbors, you need to encrypt it; to do this, in the “Wi-Fi Settings” section, select “Security”. The “Settings” page will open Wi-Fi security networks." Arrange the items as shown in the picture: Authentication – WPA2 mixed WPA encryption – TKIP WPA2 encryption – AES Preset key format - select “Password”
“Preset Key” - enter the desired password to access your wireless network, please note that the password must be at least 8 characters in length. Allowed characters include:
any Latin characters (a-z, A-Z);
any numbers;
special characters: ! @ # $ % ^ & * () - _ + = ; : , . / ? \ | ` ~ ( ).
Click the "Save Changes" button.

7. Congratulations, you have fully configured your router's wireless network, now you can forget about wires and be a fully mobile Home Internet user.

1. Download the current firmware version (BIN, 1.5 MB).

2. Open your browser and enter 192.168.10.1 in the address bar. The router will prompt you to enter your username and password. Enter admin in both fields. Click OK. The router settings will open. Select the "Tools" section.

3. Click on “Firmware Update”. The “Update Firmware” page will open, click the “Browse” button and select the file with the firmware. Click the "Update" button.

4. Attention!!! While flashing the router, do not remove it from the power supply, wait until the router completely updates its firmware and reboots (3-4 minutes).

Reset settings

Use a hard reset if you need to configure the device again (delete all user settings), there is no access to the web page of the router settings interface, after setting up the router, the Internet connection was not established or the access password was lost.

Attention! When performing a hard reset, all user settings will be reset to factory settings!

There is a recessed RESET (RESTORE) button on the device body, which allows you to reset the settings to factory settings. You can find the RESET, RESTORE button on the same side of the router case where the other connectors and buttons are located. In rare cases, the button may be located on the bottom of the router.

To reset the router to factory settings, follow these steps: Turn on the power to the router and wait until the device boots up completely. Press the RESET, RESTORE button using a pointed thin object (such as a paper clip) for 30 seconds, then release the button. After this, the router will reboot with default settings (factory settings) and will need to be configured again.

You can also reset via the router’s web interface. Open your browser and enter 192.168.10.1 into the address bar. The router will prompt you to enter your username and password. Enter admin in both fields. Click OK. The router settings will open. Select the "Tools" section. Click on the "Reset" button.

In our city, the Internet provider Beeline began connecting subscribers via so-called “fiber to the home” - FTTB - in parallel with Rostelecom. Dom.ru didn’t even exist then. At first, different models of WiFi routers were offered, flashed with proprietary firmware - D-Link DIR-300, TrendNet, NetGear, etc. Then a new model appeared, which gradually replaced the others - this is the Smart Box router. As it turned out later, this is actually the only good branded router not only from Beeline, but also among competing providers.
Setting up Smart Box yourself is very simple and there is no need to call a specialist. Now I will tell you how to do this.

Login to the configurator interface:

Device IP address in local network(), as well as login and password to enter the configurator ( admin/admin) can be found on the sticker located on the bottom of the case:

After that, open the web browser and enter the address - http://192.168.1.1. Press the Enter key and see this greeting.

Click on the “Continue” button and see this authorization form:

Enter the login admin, password admin and get to the start menu for setting up the Smart Box from Beeline.

Basic setup of Smart Box

In the start menu we need to call the configuration wizard, for which we click on the “Quick setup” button:

This will take you to a page where all the necessary parameters are collected. Honestly, as far as I remember, this was done by Dom.ru. On devices from Rostelecom and TTK, everything is much more complicated and confusing for an untrained user.

In the “Login” and “Password” fields you must enter data for authorization in Beeline billing. The account number is used as a login in our area. I think that this is how it is organized in other areas.
In the “Network name” field, you need to come up with and enter the name of your home network Wi-Fi on Smart Box. In the “Password” field, you also need to enter a key phrase that the router will request when connecting to its Wi-Fi.
If you have also connected Beeline television, then in the very bottom section of the menu, called “Beeline TV”, you should mark the LAN port into which the set-top box will be connected. Click on the “Save” button.
That's it. You can check the operation of the device!

If something is not clear, watch the video instructions.

Smart Box firmware

As with any other router, you need to periodically update the firmware on the Beeline Smart Box to a more recent one. This measure is necessary, since new firmware versions fix problems that were present in previous ones. Download latest version can be found on the official Beeline website - link.

In order to reflash the Smart Box router, you need to click on the “Advanced settings” button in the start menu:

In the window that appears, you need to open the menu section Other >>> Software update:

Click on the “Select file” button, find and feed the firmware file to Smartbox. Now you need to click the “Update” button. The following image will appear:

After the process is completed, the router will reboot itself. The settings are usually not reset. But even if they reset, don’t be alarmed, following the instructions above you can set everything up yourself without any problems!

Working with other providers

Nowadays, switching from one telecom operator to another is a completely common procedure. Everyone is looking for a cheaper tariff, faster speed, and better conditions. This is understandable and quite normal. The Smart Box router is locked to Beeline. But if you have a Superuser password, then you can configure it for other providers. And at the same time, everything is done using standard software and no alternative firmware not required. User login with elevated rights is SuperUser. The password for firmware up to and including version 2.0.24 is Beeline$martB0x. After version 2.0.25, the superadmin password was changed. Now used in this capacity serial number devices of the type SF*********. You can see it on the sticker. For example, on my device it is like this - SF13F4FF1F78.
Next we open Advanced settings >> Other >> WAN. Smartbox works seamlessly with almost any other provider. Here is an example of its configuration under Rostelecom and Dom.ru:

The router supports virtual networks VLAN, which means there will be no problems with interactive TV from Rostelecom, TTK, and Dom.ru!

The Beeline company has existed in the cellular services market for a very long time, providing its customers with high-quality communications, different services, prices are different, some are quite budgetary, which indicates that they do not profit from customers, there are promotions and bonuses. Recently, the company began producing high-quality equipment and one of these creations is a router: Smart box one- excellent Beeline router!

Firstly, the most important thing that a modern person needs is to keep up with the times and the price, in this case you won’t go broke with a smart router, because the prices are very cheap, especially if you take the all-in-one tariff for it, the cheapest is 600 rubles . per month, includes: mobile payment (including Internet), and the most suitable for active users is “all in one 5” 2500 (and this is payment for 5 numbers, television and Internet!), and secondly, the quality of communication. This is exactly what the Beeline smart box is needed for.

Connection. You need to connect the cable installed by specialists into the apartment to the Wi-Fi WAN port, and the computer to the LAN port. It’s even possible wirelessly, but if you’re a beginner and don’t know how or aren’t sure, it’s better to use the regular method.

Setting up Wi-Fi - on a Beeline router

1. Connect the computer network cable to any port of the router. (there are 4 of them, called LAN) And the cable that was brought into the apartment is connected to the WAN port in the same router.
2. Open the browser and enter: 192.168.1.1. If you entered everything correctly, you will be greeted with a greeting, then click continue.
3. Enter login - username and password. To make it easier, you can enter, without inventing your own, in the first and second fields of bilain. Continue button.
4. Select "Quick setup".
5. The most difficult part begins, but almost everyone copes, and if not, Beeline operators will be happy to help:

You find yourself in the “home Internet” section, enter any number or letter in the “login” and “password” fields just like that.

In the “Wi-Fi network of the router” section, you configure the wireless network.

• If the network frequency is 2.4 GHz: enter a name in the Network name field (everyone will see it, including you), this will be the name of the Beeline router from now on, then enter a password of at least 8 characters.
• If the network frequency is 5 GHz: enter the Network Name, for example, ali_wifi70G and create a password.
• “Guest Wi-Fi network” - setting up a wireless network (optional).
• – if television is connected, then you need to select the router port from the TV. Then “save”.
• Wait about a minute for it to set up. Great, setting up the Beeline smart box one router is complete!

Where to buy a smart box router?

Smart boxes can be purchased at any electrical supply store or at Beeline stores. Its cost is 2500 rubles. To be sure of the quality of the product, this brand and product, you can watch video reviews, most of them are on YouTube. There is also a Beeline smart box one forum, whose participants share problems, help solve them, in conclusion, no one has yet canceled customer reviews, here , which will truly help you understand the product.

Reviews about “wi-fi router Beeline smart box one”

Nikolay from Tver: (as you can see, Beeline is very large company and offers its services in almost all cities of Russia) “advantages: compact, lightweight, pleasant to look at. Disadvantages: none);

Natalya from Kaluga: « + price, design, reliability, lack of bright light indication, the seller is a friendly woman, as for easy setup for other providers. They connected, but after 4 months the Internet began to fail - “the connection was broken.” Some kind of magic you reboot, it works for about 15 minutes, and then again. Beeline operators suggested flashing it, but it didn’t work, I had to call specialists, and lo and behold, it worked!”;

Arthur from Khabarovsk:“advantages: Dual-band wifi, good speed works via wifi, does not freeze, compactness, not a strong indicator light, many inputs.

Flaws: Unfortunately, it is blocked only for Beeline; you cannot connect other telecom operators. But when you go into the router settings using SuperUser and the password, series - router number - all functions can be unlocked and you get an excellent router that works with any provider.

During the operation of the Smart-Box router, users need to reconfigure the equipment, which requires entering an individual login and password. But what to do if the router password is irretrievably forgotten or lost and cannot be recovered?

In this case, you can unlock the Beeline Smart-Box router by resetting the settings and then entering your credentials and password, among other things.

What to do if you forgot the password for the Smart-Box router?

To unlock the Smart Box router if the password is lost or forgotten, you need to change it. With the current settings, it is no longer possible to change the password. You need to perform a factory reset and then enter the required data following the recommendations below.

1. Check that network cable the computer was connected to one of the LAN ports located on the device.
2. The cable that is routed into the apartment must be connected to the “WAN” port.
3. Press the “Reset” button located on the router body.
4. On your computer, open your existing Internet browser and enter the following combination in the address bar - 192.168.1.1. The welcome page will open wi-fi control router. Click on the “Continue” button on the screen.
5. On the “Start over” page that opens, you must enter the standard login and password. Enter the word admin in both lines and click Continue.
6. In the menu that appears, select the section “Quick setup”.
7. Here you need to fill out several subsections described below.

In the “Home Internet” field, enter your new username and password. Other Beeline home Internet settings are already embedded in the device’s memory and do not require adjustment.

In the “Wi-Fi network of the router” subsection, you need to come up with the name of your home wireless network and a password to access it (at least 8 characters).

“Guest Wi-Fi network” has similar characteristics to a home network; here you also need to enter a name and come up with a password.

In the “Beeline TV” field you need to select a port to connect the set-top box. This option is relevant if, in addition to home Internet, you also use Beeline television. You only need to fill out this subsection when connecting a TV cable to the Smart-Box router. Select the number of the port to which the cable going to the set-top box is connected.

After completing all the necessary settings, click “Save”.

Saving the settings will take some time, usually about 1 minute.

Having made an Internet connection, the router will start working, and the message “Internet connected” will appear on the screen.

Reset Beeline Smart Box router

In order to reset the router, you need to find the “Reset” button on the side where the cable connection ports are located. It must be pressed using a match or a toothpick (do not use sharp objects such as a needle, you may damage the button). The button must be pressed for 10-15 seconds until the indicators on the front side of the device blink. After this, the router will boot from standard settings and will be completely ready to configure according to the instructions above.

Don’t forget to write down your new login and password so that in the future you can quickly make the necessary changes to the settings without resetting the router!

Video: Instructions for setting up a Smart Box router

Many Beeline customers know about the release Wi-Fi router Smart Box and purchased it to use the Internet and interactive television. This device is positioned as a modem for fast wireless internet and meets all current standards to ensure high connection speeds.

The Beeline company issues devices for its customers

What is remarkable about Smart Box from Beeline? It is worth saying that the router is really good in terms of internal content - it supports speeds of up to 300 Mbit/s, has a fairly capacious RAM and outperforms other models in performance. The router has additional port USB format, and the only relative drawback of its design is the built-in antennas, which, however, provide a large signal coverage area.

To initially set the router parameters, do the following:

• Open the Smart Box menu - enter the device’s IP address (192.168.1.1.) in the browser’s address bar, and after the welcome message, click “Continue.”
• In the login window, enter Admin in both lines. This data is standard; during subsequent setup, you can change it to protect the equipment parameters from outside interference.
• Select the Quick Setup menu.
• In the window that appears, in the “Home Internet” fields, you should enter the login and key issued to you by your provider (you will find this information in the contract).
• In the menu bars " Wi-Fi Network router”, come up with a name for your home network and set an Internet access password so that the connection is inaccessible to.
• You can activate the “Guest Network” section as you wish. If you want to create a separate network based on your router for your friends and acquaintances, come up with a name and access key for it.
• Since the router has 4 LAN connectors, select in the bottom line the one to which you will connect the IPTV interactive television set-top box.

After entering all the necessary data, reboot the equipment from Beeline - the corresponding command will appear when you save the changes.

Configuring Wi-Fi Settings

If you want to change the Internet settings from Beeline, go to the router menu and follow these steps:

• Select “Advanced settings” and open the Wi-Fi section, select the main settings tab on the left.
• The network SSID string is the name of the connection itself, which you change at your discretion.
• You can change the operating mode and channel. Worth putting automatic detection for the second function, then the router will be able to determine which channel to connect to. What is this for? If your neighbors also have a router installed and your device operates on the same channel, the connection may not be efficient enough. When choosing automatic mode The router will automatically switch to a less busy channel.
• In the same smart box menu, you can disable the guest network by checking the corresponding line (don’t forget to save changes).

Internet Connection Security

To protect your connection from unauthorized access, it is not enough just good password- it is worth choosing a reliable encryption type for Smart Box. This is done like this:

• In the advanced settings, Wi-Fi section, select the “Security” tab in the left menu.
• In the “Authentication” line, select the encryption type WPA2-PSK.
• In the same window below you can change the access key to connect to the network.

Software update

Each router has separate firmware, which is constantly being refined and improved to make the device’s operation even more efficient, fast and uninterrupted. Therefore, you should update the firmware of your Wi-Fi equipment from time to time, which you can do as follows:

• Download the new firmware from the official website of the Beeline provider.
• Go to the initial menu of the router and select “Advanced settings”.
• Open the “Others” section and click on the update line software(BY).
• Select "Select file" and specify the path to the downloaded firmware.
• The router will automatically update the software, after which you need to reboot it - disconnect and reconnect it to the power supply.

Port forwarding

Often, if you want to use a torrent client to download files or play online applications using Smart Box, you need to forward the port, that is, open it for the above purposes. How to do this?

This is all quite simple and will take a little time, just follow these directions:

• Select “Advanced settings” again in the Wi-Fi router menu, “Other” section.
• In the left menu, select the NAT, Application Support tab.
• In the window that appears, you can select an application from the list or set your own value, for which you need to click on the “Set user service” button.
• If you are defining your service, enter the application name, select the protocol type and the desired port range in the next two lines.

Don't forget to save all changes! If, after completing these steps, torrenting or playing games are still unavailable, try selecting the DMZ Host line in the NAT tab - enter the IP address of your computer from which you are opening the port. Didn't help? In this case, the problem lies not in the router, but in the PC security settings.

As you can see, setting up Smart Box from Beeline is quite simple and will allow any user to quickly and easily start using the device. Thanks to the services of your provider and a powerful router, you will be able to enjoy wireless Internet access with high speed, stable operation and a strong signal.