Technologies

Geolocation - what is it? Geolocation by phone number. Geolocation program: how to enable

Geolocation - what is it? This name is given to a special service that will seem extremely convenient to modern people. But not everyone knows how to use it. Below we will talk about the features of this application. In reality, everything is much simpler than it seems. And with proper preparation, citizens will be able to cope with the task very quickly.

Description of the service

So what is geolocation? This is the name of the program/service for tracking the location of people on a map using mobile devices. The service operates like a smart watch.

Thus, geolocation is a utility for spying on citizens. Not everyone knows how to use it. Often you have to secretly install the corresponding application on your mobile phone. Indeed, in modern gadgets, geolocation is not so common among the “default” software.

Methods of use

So, geolocation (what it is, we have already found out) is a program for showing a person’s location on a map in real time. You could say this is a kind of spy.

IN real life There are several ways to use geolocation. Namely:

• working with third-party services;
• use of operator services cellular communications;
• using the Geolocation service on iPhone;
• surveillance using Android.

Someone can also download and install a third-party application to determine the location of another person. Next we will look at all these techniques.

Telecom operators

But that's not all about such a concept as geolocation. What else could it be? The search engine service has a similar name. Using it is actually not difficult. In particular, if you do not use geolocation secretly. Otherwise, the process will cause a lot of trouble.

You can activate the service through telecom operators. Their application being studied is called “Navigator” or “Locator”. With their help, you can send a request in the prescribed form on the service website or from a mobile device, and then check where the person is.

The algorithm of actions will be approximately as follows:

1. Connecting the operator option on the phone that will be monitored.
2. Enable the service on your smartphone.
3. Sending a USSD or SMS request at the right time. You can simply enter the phone number of the subscriber you want to find on the geolocation website.
4. Familiarization with the information provided.

If the request was sent from a phone, the user will receive a message with an image of a map on which this or that subscriber will be displayed. Everything is extremely simple and clear.

There are several disadvantages to this geolocation:

• the need to install the option on the monitored phone;
• limited number of connected and tracked numbers;
• high prices for the service (if used frequently).

Therefore, many try to look for other techniques. And this is a completely doable task. The main thing is to approach its solution correctly.

Connection with operators (numbers)

How to enable geolocation from mobile operators? It all depends on the service company. The following options are possible:

1. "Beeline" - send an empty message to number 5166, and then install the "Locator" program for Android.
2. "Megafon" - dial USSD request *140№#. To track the subscriber, use the "Navigator from Megafon" website or the command *140*subscriber_number#.
3. "MTS" - activation occurs after submitting a request like *111*788#. To add a subscriber to the geolocation list, you need to write an SMS in the format “Add name number” and send it to number 6677. It is better to track the position through the MTS website (Locator).
4. "Tele2" - connection occurs by dialing the combination *119*01#, adding a new contact - *119*1*number#, receiving information about a person's position - *119*2*number#.

It's actually not that difficult. But you have to understand that the service you are studying works with some errors. It displays the position of the phone with a difference of up to 1 kilometer (in the city center - up to 200 meters).

Third party software

Geolocation on Android is most often activated through third-party programs and applications. Most of them are paid.

The algorithm of actions in this case will be as follows:

1. Install spyware on the monitored phone. Something like "Phone Tracker", Hellospy, Talklog will do.
2. Configure information transfer parameters.
3. From a computer or phone, send a request for pre-installed software.
4. Get information about the device's position.

Fast, simple and convenient. Spyware can only be detected by latest versions antiviruses. But finding a working geolocation is problematic.

iPhone and surveillance

But that's not all. Geolocation is built into the iPhone. This is a service that it is advisable to activate after turning on the phone for the first time.

To cope with the task, you must:

1. Open the main menu of the phone.
2. Go to "Settings" - "Privacy".
3. Select the Location Services option.
4. Set the toggle switch to the "On" position.
5. If necessary, set up a geolocation connection with other applications on the gadget.

After this, you can use geolocation using cloud service iCloud. This is done like this:

1. Go to icloud.com.
2. Sign in using AppleID.
3. Click on the "Geolocation" button.
4. Select your device at the top of the screen.
5. Click on the line "Find iPhone".

It's done. Now you can familiarize yourself with the information provided. This is how people can track their Apple devices.

Shutdown

How to disable geolocation? The answer depends on how the option is connected. In the case of telecom operators, you will have to contact the relevant organizations or use USSD requests. If we are talking about spyware, you just need to remove it.

On Apple devices you need to do the following:

1. Go to the gadget settings.
2. Find "Privacy" - "Location Services".
3. Set the switch to the "Off" position.

Now the answer to the question: “Geolocation - what is it?” won't cause any trouble. After all, you are already familiar with this application.

Many of the apps we install often ask us access rights to the location of our device.

If we are talking about GPS navigators, the question goes away by itself, because this is the very essence of such applications. When we receive such a request from some messenger, it already forces us to be wary and think about whether this is really necessary.

You can easily let your browser indicate your location. To see how for each of the major browsers. Select Co-location or select from the drop-down list. In the dialog box that appears, scroll down to the "Location" section. Select the default resolution for your future location.

From the drop-down list, select Allow or select. Generally, location apps do two things: they report your location to other users and they link real-world locations to your location. As long as the sky is clear enough, the geolocation app on your phone can pinpoint your position. Indoors, however, it is less accurate, and in places where storefronts are in close proximity, you may need to select your location manually from the app interface.

That is why we have prepared for you some useful tips that will allow you protect your privacy from such hidden spies.

Disabling geolocation on your phone

In your phone settings, find the section « Geolocation« (may vary depending on the model) and go into it. At the very top you will see a slider that allows you to turn the geolocation function on and off, as well as a detection mode, the choice of which will depend on how ready you are drain the battery of your mobile device.

These services not only allow you to share your location with friends, but also bring a social gaming element to the table. Let's look at some of them. You can register in cafes, bars, restaurants, parks, offices and anywhere else. Once your friends know where you are, they can recommend places to go or things to do and see nearby.

Even cooler, if the service recognizes you as the mayor of the location, you're in for some freebies. The service has a huge database of locations that users smoke, and you and other members can trade the virtual items you collect. Your friends can then complete trips such as city tours or bar crawls. In addition to sharing your location, you can post short messages that your friends or fans can respond with a thumbs up or thumbs down.

Each of these modes provides different accuracy of determining your location, and also affects battery charge, as stated earlier:

P. And it automatically finds your location. Freebies and special offers are also available, indexed from nearby retailers. Scroll down and select "Privacy and Security." Here you will find the "Location" menu item.

What to do if geolocation doesn't work?

Additionally, you can use the Recent Location Requests entry to check which app has access to site services and remove or uninstall them if necessary. Stay up to date with the latest developments and follow us. In fixed line telephony, the telephone network knows, because of the fixed line number, which subscriber is available on that connection.

1. Maximum accuracy: accurate and fast geolocation determination is carried out thanks to the use of a GPS antenna and its interaction with nearby networks. Battery consumption is high.

2. Via wireless networks: geolocation determination is carried out via mobile networks. Battery consumption is moderate due to the GPS antenna being disabled.

However, one of them is always available with the same number, which is very convenient. Base stations are responsible for radio transmission, the controller controls the mobile phone and base stations. A radio cell consists of at least one radio channel, which in turn consists of an uplink band and a 200 kHz wide downlink frequency.

Both the uplink and downlink streams are divided into 8 time slots. For example, which network operator belongs to this cell and what is the area number of its location. Incoming calls are also signaled in time slot 0 via a paging message. In the uplink, the first contact of mobile phones also occurs after a time interval.

3. By satellites: a useful mode only if there is no Internet, since it can be used to determine geolocation uses a GPS antenna and nothing more. Battery consumption is high, the accuracy is no different from the “Maximum accuracy” mode, but search may take longer.

Disable geolocation for a specific application

Starting with Android 6.0 Marshmallow you can disable geolocation for each application and there are two ways to do this: in information about the application itself or in the application access settings.

Time slot 1 is the signaling channel on which location updates and call settings are signaled. Time slot 1 can be used simultaneously by up to 8 mobile phones. Time slots 2 to 7 are used for speech or full speed voice connections, one time slot is assigned to exactly one mobile phone. This is always used when many people want to make calls within a radio element. If 6 radio channel timeslots should not be sufficient for subscriber traffic, further radio channels can be allocated to the cell, theoretically up to.

1. To disable access to geolocation for a specific application open information about it, go to Access and uncheck the box Geolocation.

2. To disable access to geolocation for multiple applications, go to Advanced Settings by pressing the gear wheel, then Application Access >Geolocation and make settings for each of the installed applications.

However, since radio channels cannot be reused in neighboring cells, 4 to 6 radio channels per cell make sense. You save the corresponding mobile phone location. Location areas, which in turn consist of one or more radio cells. This process is called location update. Therefore, time slot 0 must be constantly read by mobile phones in standby mode. If a cell's signal becomes weaker and a neighboring cell provides more high level signal, the cell phone changes the frequency and reads the time interval 0 of the neighboring cell from this time.

Disabling geolocation for Android 5.0 and Android 4.3 users

For owners of devices with these two operating systems, we also have a solution, namely an application that allows restrict access to some functions of our device.

Learn about the services in iOS 8 and later that protect your sensitive data, including location, on iPhone, iPad, and iPod touch.

Network use is also allowed. The network name is then shown on the mobile phone display. Is it a prepaid or standard plan, is it incoming calls only, is roaming allowed or not, call forwarding numbers when busy or not, and much more.

The target call server can be located on its own network or on the network of a roaming partner. When the mobile phone hears the paging message, it will log in and call setup can continue. Mobile phone is an integral part of our life. Discussions about the implementation of mobile phone bans in schools clearly show that restrictions are perceived as unacceptable interference with personal freedom. Even if it comes as a surprise: an employer can restrict the use of cell phones in the company due to his or her training rights.

Privacy Management

Privacy controls in iOS 8 and later let you control what apps can access information stored on your iOS device. For example, you can allow social networking software to use your camera to take and upload photos. You can also allow access to your contacts, which will allow your messaging app to find friends who already use the same app.

The directive is directed or enshrined in the employment contract. The employer may specify the content of the obligation to carry out his instructions. However, he must give his instructions “at his own discretion”, as provided for in § 315 of the Civil Code. This means that the employer's guidelines cannot be arbitrary. He must take into account the interests of the employee when he makes orders.

The nature of the mobile phone ban depends on the circumstances of the individual case and the question of how secure the employer's interests are. Therefore, it is perfectly acceptable for an employer to prohibit personal pipes during work hours. Whoever pays for the work may require that no private business be done during working hours.

Privacy settings can be changed in Settings > Privacy. From this list, you can select a data type to see which programs have requested permission to use it. The program will not appear in the list until it asks for permission to use your data. You can add or remove permission for any program that has requested access to the data. The program can use your data only if you allow it to do so.

In addition, the employer has the task of ensuring an orderly sequence of actions. Therefore, he can also limit private communication with the mobile phone, as he should not disturb his work colleagues. During breaks, he cannot prohibit personal use of a mobile phone.

Prohibition on the protection of trade secrets

There is no doubt that the mobile phone, as in schools, should remain switched off throughout the working day. Of course, a complete ban may only be permitted in exceptional cases where the company's security interests are affected. Thus, some production processes may be disrupted by the operation of a mobile phone or may be disrupted by a mobile phone. At the same time, passengers must also accept that the aircraft has an absolute ban on mobile phones.

If you allow third-party programs or websites to use your data or your current location, you are subject to their terms of use, privacy policies, and policies. To learn how specific programs and websites use location and other information, please review their terms, privacy policies, and policies. Information collected by Apple is processed in accordance with the Apple Privacy Policy.

However, to protect trade secrets, a comprehensive ban on mobile phone use can be implemented, even prohibiting the use of mobile phones in the workplace. From today, it is unlikely that a mobile phone without a camera function will be sold, the mobile phone can be used in development departments, which are said to belong to the environment of industrial pioneering.

Geolocation: do we really need it?

Apart from the secrecy aspect, respect for the individual rights of employees also plays a role and may lead to a cell phone ban. A pleasant receptionist should not be pleased that an enthusiastic colleague is taking photos on mobile phones. He can rely on his own image. A courting boss may limit cell phone use to protect the peace of the company. And this may even be necessary under the Equal Treatment Act if there is evidence of discrimination in a particular case.

Using location services on iOS devices

With your permission, location services allow apps and websites (including Maps, Camera, Weather, and others) to use cellular, Wi-Fi, GPS, and Bluetooth data to determine your approximate location.

In apps that use this data, such as Maps, your current (approximate) location is marked with a blue marker. If your location cannot be accurately determined, you will see a blue circle around the marker. The radius of the circle depends on the accuracy of the definition - the smaller it is, the higher the accuracy.

When location services are activated, a black or white arrow will appear in the status bar.

Availability of maps, directions, and location-based applications may vary depending on your data service. These services are subject to change and may not be available in all regions. As a result, maps, directions or location information may be inaccurate, incomplete, or missing. To clarify the information, compare the data displayed on the device screen with your surroundings and follow the road signs.

Granting permission to the program to use your location data

The first time you try to get your location data, even in the background, the program will ask for permission. You'll see which program is asking for permission to use your location data. In addition, the program developer can explain exactly how the program will use them.

Some programs only request access to your location when they are in use. Usage means active use of the program in the foreground or use in background, which will be indicated by the indicator in the status bar.

Other programs request access to your location data even when it is not in use. When you give permission to an app to always use your location, iOS will remind you which apps can use that data after an app uses your location in the background.

Turn location services on or off

You can turn location services on or off in Settings > Privacy > Location Services. You can turn on Location Services when you first set up your device in Setup Assistant, or at any time by using the Location Services option. Access to geolocation services data can be configured individually for each program and system service. If location services are turned off, apps can't use your location, regardless of whether they're running. This will limit the capabilities of many Apple programs and third party developers.

Settings > Privacy > Location Services.

Settings > Privacy > Location Services > System Services.

Reset or disable location services

Location alerts are requests to use location services from apps like Camera, Maps, and Compass, as well as third-party apps that require geolocation data to function. The first time you try to access location services data, the program displays a warning. By clicking the "Allow" button, you will allow the program to use location services if necessary. If you click the Deny button, the program will not be able to access location services data. Apps won't use your location unless they ask for your permission and you give it.

If you want to reset all location settings to factory defaults, go to Settings > General > Reset and click Reset Location Settings. Once you reset your geolocation and privacy settings, apps will stop using your location unless you give them permission to do so.

Increasing the accuracy of geolocation using a GPS signal

The accuracy of geolocation using a GPS signal depends on the number of GPS satellites in the visibility area. It may take several minutes for the device to detect all satellites in view. The more satellites are found, the higher the accuracy of the determination will be. To improve the accuracy of GPS geolocation:

• Be sure to set your device's date, time, and time zone correctly in Settings > General > Date & Time. Use the Automatic option whenever possible.
• Choose seats with open views in all directions. Walls, vehicle roofs, high-rise buildings, mountains and other obstacles can interfere with GPS satellite reception. If the signal from GPS satellites fails, your device uses signals from nearby cell towers or Wi-Fi networks to locate you until the satellites come into view again.

Location services based on available Wi-Fi hotspots and cell towers

When Location Services is enabled, your device will periodically send the geographic location of nearby Wi-Fi hotspots and cell towers to Apple in an anonymous, encrypted form to contribute to Apple's crowdsourced database of hotspot location data. Wi-Fi access and cell towers. If you're on the move (for example, in a car) and Location Services is turned on, your GPS-enabled iOS device will also occasionally send GPS-derived location and speed data to Apple in anonymous, encrypted form to contribute to its crowdsourced database. Apple traffic data. Crowdsourced geolocation data is collected by Apple in anonymous, encrypted form and does not personally identify users.

SIM card PIN code.
2. For iOS devices sold in China, the term Wi-Fi may be replaced by the term “Wireless LAN (WLAN). .
3. GPS is supported on iPhone devices and iPad Wi-Fi + Cellular models.
4. Bluetooth communicates with iBeacon devices to create and monitor zones in which specific identification information is provided.
5. iOS devices without a cellular network connection use only the Wi-Fi network (if available) for location services. Some third-party programs use the Wi-Fi connection to determine the region. If your device is locked with a passcode, this feature may be limited or may not work accurately.

Date of publication: 09/30/2016

Post navigation

Hi all! Geolocation services, today, are one of the key functions for absolutely any device. And gadgets from Apple are no exception. No, of course, it’s quite possible to call, write SMS, take notes and go online without using them. However, there are many programs, applications and services in which without determining the exact positioning there is absolutely no way.

Take, for example, the same cards or the coolest (in my opinion) “Find iPhone” option (lost mode, remote blocking, etc.). Agree that without detecting coordinates it would be very difficult to use them (if not impossible at all). So geolocation is a very necessary thing - let's find out more about it...

Let's go! :)

What is geolocation in iOS and why is it needed?

As you probably already understood, this term hides a more familiar word for us - navigation. It is she who is responsible for determining the exact location of your iPhone or iPad.

You can use navigation on absolutely all iOS devices, except:

• iPod Touch.
• iPad (versions without SIM card support).

It is on these gadgets that geolocation services do not work, for a simple reason - Apple does not install GPS receivers in them.

Why is it needed at all? Well, everything is clear here - there are a lot of programs (maps, navigation applications, weather, etc.), for the normal and correct operation of which these services are simply necessary.

What you should pay attention to when using:

1. As a rule, the device gets very hot.
2. The battery runs out quite quickly.

Like me, this is normal and there is no need to panic. Just pay attention to the one at the top of the screen, and if the geolocation icon is constantly lit, it means some application is continuously using it. It is better to close it or promptly disable this program’s access to GPS. How to do it...

How to turn location services on or off on iPhone and iPad

You can manage them, like any other function, in the device settings. Go to Settings - Privacy - Location Services.

Here you can either turn them on or off completely. Plus, programs that use these services in their work are displayed, and it is possible to disable forced navigation for any individual application.

Two solutions are available:

• Never turn it on.
• Only when using the program.

It's better to leave the second option. Then it turns out that GPS seems to be always on, but it will only be used at the moment when it is necessary for the program itself. Which has a positive effect on charging :)

By the way, if you just bought a device, then with , the ability to activate geolocation is also available.

How to search iPhone by geolocation - via computer and mobile device

A great option to help you find your iPhone or iPad. In order to search for a device, two conditions must be met:

1. Active “find iPhone” function (enabled or not).
2. Working geolocation.

If these two conditions are met, then we start looking! It doesn’t matter from where, from a computer or a mobile phone, go to the iCloud website, and then indicate the Apple ID and password (the one installed on the missing gadget).

Just click on the “find iPhone” button and after a while you will see on the maps the place where it is now.

Plus it will be possible to perform some actions with it:

• Play the sound (convenient if you lost it at home).
• Activate lost mode, then the device will be locked and in order to unlock and use it, you will need to enter your Apple ID and password (about this situation and how to solve it).
• Erase iPhone. Equivalent to resetting to factory settings. Just delete all information from it.

Let's move on to the most unpleasant part, the problems...

What to do if geolocation on iPhone does not work?

Mechanical failure, when the GPS module does not work, is quite rare.

And here it is clear what to do - either use it without it, or replace it at a service center. However, problems can often be solved without the help of specialists.

1. It is necessary to understand where exactly navigation does not work. If only in one or several applications, then we look to see whether the services are enabled specifically for these programs (we read how to do this at the beginning of the article).
2. If the location is not accurate or is poorly determined, check whether the Internet is turned on via a SIM card or Wi-Fi. This data helps position you better. Plus, accuracy is affected by terrain, buildings, buildings, clouds, etc. In general, everything that is on the direct path between satellites and the iPhone.
3. Jailbreak, or rather tweaks installed with it, can also cause navigation problems.
4. You can reset the network settings, and if that doesn’t help, then . Do not restore from backup copy, and check the operation on a clean device.

If after performing all these actions there is no result, then we go to the service - there are no other options.

Modern phones are equipped with dozens of useful tools that make life much easier for their owners. Geolocation is one of these services. Without this technology, it is impossible to imagine the operation of many applications for smartphones and tablets. The owner of the gadget can enable or disable geolocation, as well as manage the parameters for transmitting geodata independently using the phone’s settings menu.

What is geolocation

Geolocation is determining the real location of the smartphone or other electronic device. The service calculates the geographic coordinates of the gadget using radio navigation methods and geographic information systems. Geolocation programs receive signals from GPS and base stations mobile communications. The service also processes Wi-Fi connection data and uses the Bluetooth interface for more accurate location determination.

Concept“Geolocation” refers to both the process of determining the location of a device and the resulting coordinates. The service can use information about the IP address of a gadget connected to the Internet. By sending a request to a special WHOIS server, the program receives data about the physical location of a computer, tablet or phone.

Note: if you want to hide your real address when logging into Internet resources, learn more about the technology.

Why is geolocation needed?

Geolocation is used mobile applications who need to know the location of the device for full operation:

• Maps and GPS navigators - show where the phone is located in at the moment, and help you build the best route based on your current geoposition.
• Browser ( Google Chrome, Opera, Yandex) - produces results based on the user’s geolocation to simplify the search for the necessary information.
• Weather - geodata helps programs calculate a more accurate forecast.
• Camera - you can mark the coordinates of the place where the photo was taken.
• Taxi - in the application the user sees his address on the map, as well as the movement of the car that went to fulfill the order, etc.

Geolocation is used by most programs that require authorization. The application tracks where the account was logged in from. Above all, this helps protect the personal data of the profile owner. When attempting to log in from someone else's device or from a new location, the user will receive a corresponding notification and will be able to log out of the account if he suspects that it has been hacked.

It's important to note that some programs only request location access while they're in use, while others even ask for location access in the background. If your smartphone's location services are turned off, apps won't be able to retrieve its location.

Note: Find out what it's for and how to check if it's on your phone.

How to enable geolocation?

Let's look at options on different OSes.

On Android

To enable geolocation on a device with operating system Android, you need:

• Open the Settings menu. In the “Personal” (“Personal Data”) section, select “Location”.

• Activate the function by clicking on the switch opposite the “Location” inscription.

• In the “Mode” section, you can choose how the service will determine the device’s geodata:
  • By GPS sensor;
  • via network - a signal from nearby mobile communication stations is used, the geoposition may be displayed with errors;
  • via network and GPS sensor - a combination of all available tools for more accurate location determination.
• By going to the “Geodata Access” menu, you can set geolocation parameters for individual applications. You need to click on the name of the program and select one of the proposed options.

Some Androids have more quick way enabling geolocation. Swipe down from the top of your device's screen to bring up the notification panel and activate the Location feature.

On iPhone

To enable geolocation on an iPhone or iPad, the owner of the gadget will need:

• Open “Settings” and go to the “Privacy” section.

• Select “Location Services” from the submenu.

• Activate “Location Services” using the appropriate switch.

• In the “System Services” section, you can configure personal settings for transferring geodata to iPhone.

• The user can also enable or disable location services for individual applications by clicking on the name of a particular program.

Let's sum it up

Geolocation is the determination of the physical location of a phone using special services and tools. Geodata is used by programs such as Maps, browser, Weather, as well as applications with an authorization function in order to protect accounts and personal information of their owners. Enabling geolocation services on Android and iPhone is done through the smartphone settings menu.

Geolocation on Android is the determination of the location of the phone.

Any user mobile technology can view places he has visited, build personal routes and find out the location of another person with his consent. The navigation system is supported by all modern smartphones. To use it, you must first activate geolocation. GPS and data transmission over the Internet are responsible for determining the location of the device.

Navigation in your device is factory installed. In order to use it, just activate the option in the settings.

The function works by connecting to a satellite or nearby base stations. The smartphone finds beacons to receive a signal, transmitting information about where it is.

Modern mobile devices are compatible with all existing navigation systems (GPS, GLONASS), regardless of region. The main task of geolocation in Android phones is to create your own route. To implement it, you can use a Google account or third party programs from the official market.

How to enable

Geolocation on an Android phone is enabled through the panel quick access, which appears when you swipe your finger across the screen from top to bottom. In this menu you need to activate the function by clicking.

Another method is to go to the settings and find the “Location” or “Geolocation” item, activate the option using the slider. In the settings menu of your Android phone, you can also go to “Google” and find the “Location” item, then activate geolocation.

For a more precise definition, check “By all sources” below.

How to send geolocation from Android

If the user who needs to send your location has Google account, add it e-mail address V Google Contacts and follow a few steps:

To send a geolocation on Android from a Yandex map, select the desired object and follow the instructions:

Geolocation on an Android phone is disabled in two ways:

1. Via the menu on the quick access panel at the top of the screen.
2. Through the smartphone settings.

To delete saved information about your movement, you need to go to “Settings” and selecting “Location”, click on the “Options” icon at the top of the screen, then select “Delete location history” and confirm the action twice.

On Samsung

To disable the geolocation function in Samsung smartphones, just swipe down from the top of the screen and deactivate the “Geolocation” icon in the drop-down menu.

Through the settings menu, you can disable the feature by following the steps:

• find the item “Geodata”;
• disable by moving the slider to the left.

On Xiaomi

You can also disable geolocation on a Xiaomi Android phone in 2 ways. Via the menu quick settings and using the usual smartphone settings:

1. Swipe across the screen and find the “GPS” icon in the drop-down panel. Click on it to disable it.
2. In your smartphone settings, find the “Other” option, then select “Privacy” and scroll down. Go to the “Location” item and deactivate the slider.

On Viber

To prevent the Viber application from sending your location through the Android phone settings, you need to follow the instructions:

1. Go to “Settings”.
2. Select the “Privacy and Security” section (in some devices, “Applications” - “Permissions”).
3. Go to “Location” and turn off the slider.

How to set geolocation on my husband's phone without him knowing

There can be many reasons for the need to determine the location of another person: concern for a loved one, suspicions of one of the spouses, persecution of a debtor, surveillance; search methods can also be different, for example, by number or using services that provide geolocation services, with or without the consent of the smartphone owner. Not all methods are legal.

To determine the location of the owner of an Android smartphone, you can use the service remote control. It is designed to search for a mobile phone in case of theft or determine the location of a child for his safety.

To set up the function, you need to add a Google account to your husband’s device and save his login and password in a safe place. Next, open the “Find My Device” service on your PC, you can find it through a search engine, and enter the data from this account on the input page.

On the expanded map you will see the location of your husband’s device, provided that the phone is turned on and connected to the Internet.

How to set up

Google services use user location data. The most common:

• location determination;
• transfer of geodata to other users;
• geolocation history.

For options to work correctly, they must be configured.

To determine your location, you must activate the “Geolocation” icon in the quick settings drop-down menu or in your smartphone settings. For a more accurate determination, you need to activate the “Use all sources” item in the “Mode” section or, in newer versions of Android, select the “More accurate determination” function.

Location history allows you to use additional services: device search, traffic data, recommendations for places visited, individually built routes.

Location history is linked to your Google account. To use the service, you must make the following settings:

• login to account Google;
• activate location history;
• Allow location sharing.

How to change geolocation

To maintain anonymity, you can change your location on Android devices. There are many third party applications to change the phone's geodata, various VPN services.

By standard means it is also possible to change the location. To do this, you need to go to the developer options of your Android phone:

• go to settings and find the “About device” item;
• on the “Build number” item, click with frequent rhythmic movements more than 8 times;
• After these steps, a new item will appear in the menu - “For Developers”;
• go in and check the “Fictitious locations” checkbox.

How to update geolocation

Sometimes, with a change of location, the geolocation on Android does not change. To display geodata correctly, you should update the location function:

• go to the settings of your device;
• select the “Date and Time” section;
• deactivate the time zone over the network and select it manually;
• turn on the network time zone display again;
• go to the “Location” item in the smartphone settings;
• make sure the function is active;
• select the “Mode” section;
• select "Across all sources".

Why geolocation doesn't work on Android

Navigation problems in a smartphone can occur for several reasons. They are divided into software and hardware. Failure of the navigation module belongs to the second group. Occurs due to mechanical damage, shock or wetness of the smartphone.

Software includes:

• outdated firmware version;
• use of third party applications from Play Market that use geolocation data (for example, to call a taxi);
• minor system glitch;
• incorrect settings.

Why geolocation shows the wrong location on Android

The incorrect phone location is displayed if:

1. In the geodata settings, only one source is selected (Wi-Fi, GPS or cellular network).
2. Enabled the mock location feature in Developer Options.
3. The compass needs to be calibrated.

To calibrate, you need to open " Google Maps» and make several circular movements with your hand with the phone in the air. The compass beam will become narrower and point in the right direction.