ExternalYota antenna - a simple solution to a big problem
The Yota amplifier, as you can guess from the name, is nothing more than an external (installed outside the case) transceiver module, made in the form of an outdoor or indoor antenna, compatible with modems and routers produced under the Yota brand. It takes over the functions of their standard low-power antennas, increasing the integrity and speed of data transmission.
Wireless Internet from Yota is such a thing... it often does not reach the speeds promised by the operator. It is not surprising that Yota amplifiers are in such great demand among the population, which not only remains unchanged over the years - it is steadily increasing. Indeed, for many, strengthening the Yota signal has become a real “headache” - a problem that seems insoluble.
However, exactly until they visit the online store site, where you can always buy an antenna for Yota, and not just buy it, but do it at the best price in the city! Solving a long-term problem with the Internet, as practice shows, will probably not take you not only a lot of time, but also money. This problem turned out to be not so serious, if you look into it...
How not to make a mistake when choosing an antennaYota
However, you should not assume that absolutely any antenna for Yota that you purchased on occasion from the metro will be able to resolve it. Such purchases rarely turn out to be successful, and therefore there is no need to place high hopes on them.
What do we mean by "good"? This is a signal amplifier for Yota that will be equally effective within the city, where neighboring buildings block the radiation of base stations, and outside of it, where base stations are very remote. Problems with using wireless Internet arise everywhere, but you no longer need to worry about them - they no longer concern you!
By choosing an electronic store site, you are guaranteed to receive an effective Yota signal amplifier, since there are simply no others in our assortment. All that remains for you to do is to decide on the technical characteristics, which directly depend on technical characteristics the Yota device you are using (modem or router).
Objective signs of a good antenna for Uota
Not least important are the materials from which our amplifiers for Yota are made. An external antenna, even if it is used indoors, and especially if it is used outdoors, must be made of high-quality weather-resistant, but not interference-free materials. Otherwise, the yota amplifier will not only not provide the required efficiency, but also will not work for a long time.
Distinctive features of antennas forYotaLTE
External antennas designed to strengthen the Yota LTE (Yota 4G) signal have become widely popular relatively recently. The fourth generation wireless networks that came to large cities in Russia did not do this to the fullest extent, which is why many subscribers were unable to enjoy the traffic and connection stability they were promised.
In its design and principle of operation, the antenna for Yota LTE is no different from antennas intended for use in networks of previous generations. The difference lies in the data transmission standards it supports, which are more demanding on both the receiving and transmitting capabilities of the antenna, as well as in the technologies and devices developed for them.
However, to the same extent as the Yota external antenna, this applies to cable products and connectors used to connect them to modems and routers of the same name. An LTE amplifier for Yota, if it was connected using low-quality cables and connectors, can lose up to 15% of received and transmitted signals, thereby negating all the advantages of its use...
About the dangers of low prices for antennasYota 4G
But let's return directly to the Yota LTE signal amplifier. All of them are developed taking into account the most modern advances in the field wireless communication and therefore they do not cause any complaints. They are being developed by many companies from the USA, China and some other countries, because LTE, according to international experts, is the future, and its commercial use is a great benefit!
The situation is being spoiled by small manufacturers who, wanting to reduce the cost of their products as much as possible (including Yota LTE antennas), use completely unsuitable materials that can turn any, even the most ingenious project, into an “unviable monster”. There are thousands of examples of this. The lion's share of them are Chinese-made antennas intended for use in conjunction with USB modems.
External antennas for Yota (to strengthen the signal of the mentioned operator) are very widely represented in Russia. Buying a Yota 4G amplifier today is not a problem, the problem lies in something else - in its choice! The latter is greatly complicated by the innumerable variety of brands, of which very few are trustworthy. Often the buyer has to choose between bad and... bad, which in our opinion is unacceptable.
Amplifier for modemYota at a competitive price
Fortunately, you are on the website of an electronic store, a site whose customers who decide to purchase this or that device for Yota (a signal amplifier, for example), do not encounter such problems. The Yota LTE external antenna purchased here will certainly not let you down, providing ideal data reception and transmission regardless of the distance from the base station.
However, this is not the only strong point our antennas for amplifying the 4G Yota signal - their favorable price also excites many, attracting more and more new customers to the site. Precisely profitable, but not understated; this, let me note, is not the same thing! We don’t deal with cheap antennas made by someone unknown, and we don’t advise you to!
The same antennas for Yota LTE amplification that you can see in the catalog of this site are sold at the best prices in Moscow, which we rightly call profitable! These antennas are not here by chance - they are made of high-quality metal alloys and modern polymers, with the strictest compliance with the requirements of the LTE standard and related global standards.
Modem Signal BoostYota by technologyMIMO
Antennas that support Multiple Input Multiple Output (MIMO) technology, which recently appeared in the line, deserve a special mention. external devices for Yota. MIMO antennas are characterized by a more complete use of the bandwidth potential provided by the LTE standard, which was made possible by dividing the transceiver device into two parts - receiving and transmitting.
A MIMO-compliant Internet signal amplifier for Yota, therefore, is not one, but two antennas that must be installed so that they do not interfere with each other, creating frequency correlations. Similar antennas for the Yota LTE modem provide at least double better speed data transfer, and this without any changes at the standards level.
Today, the MIMO signal amplifier for the Yota modem is the best solution to problems when using radio frequency communication channels of the LTE standard. Its disadvantage, and even then a small one, is considered to be only the need to install two antennas instead of one, but this can also be successfully eliminated thanks to the use of frequency selectivity technology (by connecting these antennas in one housing).
Your choice - antenna and modem (router) in one set
You can purchase an antenna for the Yota 4G modem, as well as an antenna for another popular yota device - a router, from us not only separately from the modem (router) itself, but also together with it. After all, the website’s electronic store sells not only a variety of antennas, but also other devices designed to work in the Yota operator’s wireless network, as well as accessories for them.
Buying a yota modem with an antenna is, without a doubt, the right decision. You will have to purchase an antenna one way or another - not now, but then later, after spending a certain amount of time selecting it to match the characteristics of the modem, which is not at all as simple as it might seem at first. It’s better to do this in advance by purchasing a Yota modem with an antenna included! This way, by the way, is not only more convenient, but also cheaper.
Please note that we also sell antennas with a built-in Yota modem. Such antennas are predominantly indoor (intended for use in rooms with normal humidity and temperature); they are optimal for use with laptops and tablet computers, at home, at work, out of town, on the road - there are no restrictions!
Sale of antennas for modemYota and more
We not only sell, but also install Yota antennas. This service is one of our most popular: it was used by more than 80% of those who once bought these same antennas from us. Considering how well the specialists of the electronic store website understand Yota devices, installing antennas does not seem such a difficult task for them.
Here it is necessary to clarify that they are not always compatible with each other - a Yota modem and an external antenna. Many modems of this brand, as well as many of its routers, do not have connectors for connecting such antennas at all, which pushes their owners to experiment with a soldering iron. What could all this turn out to be? Apart from losing the warranty on the device, nothing...
From us you can not only purchase modems and routers, but also modify them by adding the ability to connect external Yota antennas. Buying a signal amplifier and not being able to connect it to a modem is, of course, unpleasant, but not so much as to ruin your mood. Just contact us and we will eliminate this annoying error from the modem manufacturers.
We offer to buy a repeater from leading manufacturing companies. We will advise you on the model and tell you about the features of the products. We will answer questions related to the choice of equipment. We have solutions for all situations - from standard to technically complex. We get to work even in cases where other companies assure you that it is impossible to speed up the Internet.
A necessary set of equipment to strengthen cellular communications.
The system for improving the GSM signal from YS Service consists of the following components:
repeater;
external antenna;
internal antenna;
coaxial cable.
YS Service has been providing Internet connection setup services for 8 years. Our specialists have studied the communication features down to the smallest detail. There are no unsolvable tasks for us! The experts have everything to help you fully use the Internet:
range of Internet equipment (Yota repeater, antennas, amplifiers);
high-performance electronics for problem detection;
experience and professionalism;
desire to provide exceptionally high-quality service;
responsibility and serious attitude to work;
technical literacy.
What is our price for a repeater?
We work with a wide range of consumers, so the choice of products is represented by various price categories. Our employees will never advise you to buy a repeater for your dacha from the most expensive segment if this is not necessary. We work honestly, we want to be useful to everyone.
Do you doubt that you have enough money to purchase a repeater? We will definitely find suitable Internet equipment for the price. Contact us now! We certainly have a way to solve your problem. In any case, our advice will be useful to you. Call!
How to make a Yota signal booster using improvised means and get excellent speed? Let's figure out together how to strengthen the Eta signal.
Wireless technologies have always been inferior in speed and stability to regular wired Internet. With the development of technology, the situation has not changed too much. 4G and LTE, although they have taken a significant lead compared to the third generation of the network, are still behind cable Internet.
To your clients wireless access to the Internet and also sells modems and routers that work exactly. However, many users complain about the Internet, so they want to strengthen the Yota signal with their own hands. In this article you will learn how to make a Yota signal amplifier with your own hands and what you will need for this.
Factors that affect speed
To begin with, let's highlight a list of factors due to which it worsens and the speed drops to frivolous numbers. Here is a rough list: 
- obstacles inside a house or apartment - walls, a lot of furniture, and so on;
- long distance to the station;
- number of connected devices;
- terrain, weather.
This is only an approximate list of what can adversely affect the operation of the Iota device. However, not all factors depend on the user himself. For example, if the network is heavily congested, you will not be able to influence the operation or improve the signal in any way. 
What can be fixed?
The most in an efficient way is to install an antenna as an amplifier. Although a standard antenna is built into the router or modem, its power may not be enough for certain conditions. The antenna is a universal amplifier for Iota. You can choose one of two ways:
Let's take a closer look at the second option.
Do-it-yourself Yota signal amplification
First, you need to choose the most advantageous position for the router. It can only be found experimentally. Start the modem and enable the speed measurement service. Move around the room with the device and measure speed at different points. If you cannot achieve consistently high performance, then try installing the device outside the window. However, remember that in this case you will need additional protection from external influences (weather conditions). 
Many experts argue that independent amplification does not lead to anything good and only spoils the receiving device. However, in practice homemade amplifiers give a noticeable effect. Let's figure out how to strengthen the signal of the Yota 4g modem using improvised means.
Homemade antenna amplifier
For this device, you need to use a metal object. A metal or aluminum lid from a pot or pan to which the modem is attached works well. This structure must be fixed in the place where you caught the highest reception speed.
You can also use the Yota modem as an amplifier for the 4g signal satellite dish. Also attach the receiving device and take care of protection from external influences so as not to damage the device. The amplifier antenna should be directed towards the network station.
Let's look at a few more ways to strengthen the signal of the 4g Yota modem. 
Third party methods
Also when working with wireless internet extraneous interference should be taken into account. To improve your Internet speed, use the following tips:
- remove all equipment that interferes with the operation of the device;
- place the receiving device in a free place, which should not contain bulky objects or extraneous electronic and radio equipment;
- disconnect unnecessary devices from Wi-Fi - this will help reduce the load;
- set a password for home wireless network so that no one else can connect to it. This will also increase the stability and speed of the Internet;
- You can also connect two identical router models in parallel, which will improve the signal. For setup, you can find instructions on the Internet or contact specialists.
Now you know how to strengthen the Yota many signal and can increase the speed of your home Internet.
Making an iota signal amplifier is very simple. Many have noticed that LTE routers (like regular ones) have one bad feature - they lose the signal. Sometimes it even gets to the point where, standing next to the transmitting device, we may not see at all. mobile network. To do this, you need to strengthen the Yota signal.
Distortion and signal loss can come from both metal structures and other devices (be it smartphones or microwave equipment).
4G or regular WI-FI router in an equidistant location from all received devices.
If you install an access point or your Yota router on the outskirts of the site - in a country house and try to catch the signal in a gazebo on the other side of the site - then this is not the best best solution Poor wireless router signal problems
There is no need to install the Yota router next to or in iron boxes or in the corners of walls
All metal objects as well as working electrical appliances (refrigerators, washing machines, dishwashers) greatly reduce WiFi signal transmitted from the Yota router.
Strengthen the signal of the router's iota WiFi antenna
Please remember that standard antennas are omnidirectional and distribute it evenly in all directions. Don’t forget this when placing the router on the border of the property, because if the network is open and not password-protected, half of the signal will go to your neighbors.
There are many ways to boost or direct a wireless signal.
1) The main one is the simplest - If the WiFi router antenna is removable, then you should replace it with a more powerful one.
2) A quick or economical way is to use the reflective properties of foil (metal) materials.
Here you can even use empty beer cans, which in skillful hands turn into high-efficiency antennas.
Solving problems with weak WiFI network adapters
In many devices including both desktop computers or mobile netbooks, manufacturers often provide very cheap network adapters. They are mainly designed to work with a stable signal.
To do this, as an option, for example, you can replace the built-in WiFi card with a more suitable one and with the ability to connect an external antenna. Then you (in emergency situations) will always have the opportunity to connect external antenna to your computer (netbook, laptop, etc.) and receive a signal from a Yota router located at a fairly distant distance.
WiFi repeater. Adding Yota router coverage
If the main task is to receive a signal from a remote managed network no matter what, then as an option this network can be extended, lengthened.
1) Remember that all wireless devices have multiple channels. Therefore, remember that different channels may have different signal reception quality.
How to change the router channel? - To do this, you need to enter the router-configuration and change the WiFi channel. Look for best channel, save the settings and don’t worry - the settings of your computer, laptop, etc. will not change. Only the program settings change.
2) If possible, you can reduce interference from refrigerators and other radio devices
3) Update all network firmware drivers
4) If possible, try to choose wireless network equipment from the same manufacturer.
Yota is a federal wireless operator. The shareholder of the telecommunications company is OJSC Megafon. According to the first quarter of 2015, Yota’s subscriber base was 1.2 million users. In March of the same year, the operator launched 4G networks in 39 regions of Russia.
Mobile Internet from Yota
Broadband 4G Internet from Yota operates in the LTE standard - this technology provides high-speed access in cases where the use of DSL digital lines is technically impossible or economically infeasible.
On at the moment Internet access from Yota can be provided by the following devices:
Yota modems
4G LTE modem
These are compact USB devices weighing about 50 g that provide high-speed network connectivity. Modem The modem can be connected directly to a laptop or computer, or be installed in router with USB port. The latter scheme is used to distribute the Internet from one modem to several computers.
4G LTE + WiFi modems
The same USB modems, but with a WiFi network function. They replace a router, i.e. To distribute the Internet, such a modem is not connected to the router, but simply to any 5V USB power supply, incl. The USB socket of the car radio will do.
Yota pocket routers
4G/WiFi access point with built-in 3G and LTE support. The router is equipped with a battery and operates in offline mode up to 8 hours, outdoor use possible. When connected to a PC, it can be used as a USB router.
Yota Internet centers
Internet center with connection to 3G/4G networks. Supports connecting consumer clients via both wired LAN ports and WiFi. A number of models have an RJ-11 telephone jack for connecting a landline phone and calling via a SIM card.
4G antennas - amplifiers
Thanks to their design and increased size (25-50 cm), they strengthen the carrier signal and thereby increase the speed and stability of the Yota Internet.
