How to set a password for a computer on Windows 7. How to set a password on a computer with any version of Windows

Many PC users are worried about their data and want to install protection on their account. Then they have a question about how to set a password on the computer. Today we will look at this issue in detail.

What does the password do?

Probably, the question will immediately arise whether there is any point in protecting your account. Of course there is. For example, if you have many users at home, but only one computer, it’s definitely worth creating everyone’s own account in the system and putting a code so as not to interfere with each other and leave everything important files safe.

However, it must be borne in mind that this is not the most best protection, and it's easy to get around. In search engines you can find many solutions on how to log into a password-protected account. Windows entry.

Setting a password

Now, in fact, let’s move on to how to set a password on a computer step by step. We will look at the example of two operating systems - Windows 7 and 10. They are very popular lately.

Windows 7

Let's start with a lower version of the operating system Windows systems. Install on it security code easily:

1. Go to menu Start and open Control Panel.



2. There we are interested in the section "User Accounts".



3. You should click on the link "Change Windows Password".



4. Now for installation secret code you should click on the inscription: “Creating a password for your account”.



5. Next, you need to enter the code twice, as well as some word or numbers, as a hint if the code is lost or forgotten.



Here's how to put a password on Windows computer 7. The instructions are quite simple, and even a “kettle” can handle it.

Windows 10

Now let’s write down instructions on how to set a password on a Windows 10 computer:





Find out the Windows password

Some people are interested in how to find out the password set on the computer. This cannot be done, but you can reset the security code.

Resetting the password on Windows 10

To do this, we need a flash drive with a recorded distribution of this operating system. If it is, then:

1. Boot from a USB drive.
2. In the installer window you need to click "System Restore".
3. A window will appear with various actions. Click on "Diagnostics".
4. There you need to choose "Advanced options".
5. Next you should click on "Command line".
6. Then you need to make a copy of it. To do this, you need to enter the command copy D:\Windows\system32\cmd.exe D:\Windows\system32\sethc.exe /Y .
7. A message will then appear notifying you that the file has been copied. You need to reboot the system.
8. Now you need to press the key about 5-6 times SHIFT when the OS asks you to enter the code.
9. In the command line that opens, enter net user admin2 /add .
10. Then we register net localgroup Administrators admin2 /add to make the new account an administrator.
11. After this, you need to restart the computer system and log into Windows through a second account and delete the code on the old one.

Today we will learn how to set a password on a computer where the Windows 7 operating system is installed.

In what cases might this be needed? Completely different.

So, for example, to limit the people who can sit at a given computer, or for the security of information that is on hard drives, or to prevent children from sitting at a PC for several hours while their parents are not at home, and so on.

We will bet computer password in Windows 7 using your account. Usually there is one account on the computer with your name and it gives all administrator rights. That is, if we turn on the computer and log in as an administrator, then we can view all files, install, remove programs, and so on. You need to set a password for this main account and when you turn it on you will need to enter it, otherwise you will not be able to access the data.

Video: Put a password on your computer

How to set a password for an account in Windows 7

To do this you need to do a few simple steps. Let's get started.

Let's go to " Start - Control Panel».

In the window that opens, in the right corner of the folder, change View from “Category" to "Small icons".

Now in the same folder we look for the item “ User Accounts" Let's go there.

We come up with a password and enter it twice in the appropriate forms; we can also enter a password hint. There you can write what exactly this password is associated with, so that if you suddenly forget it, it will remind you. Once everything is ready, click the “Create password” button.

As we can see, we now have an account Password protected, and it became possible to either delete the password or change it.

Now, when we turn on the computer, when the system boots, Windows 7 will require us to enter a password, otherwise the system will not start.

After setting a password for your account try restarting your computer. I got this window where I need to enter my password:

With these simple steps you can put a password on your computer with operating system Windows 7. In the next lesson we will look at how to set a password on a computer with installed system Windows XP.

For now, that’s all for me, and if you have already figured out the topic of passwords in Windows 7, then now I recommend reading the article: “ “! I wrote this article just a couple of days ago. See you!

Ensuring the safety of data is a concern for many PC users. This issue becomes doubly relevant if not one person, but several, have physical access to the computer. Of course, not every user will like it if an unauthorized person gains access to confidential information or spoils some project on which he has been working for a long time. And there are also children who, even unintentionally, can destroy important data. To protect yourself from such situations, it makes sense to set a password on your PC or laptop. Let's see how to do this on Windows 7.

There are two options for setting up a password-protected login:

• For the current profile;
• For another profile.

Let's look at each of these methods in detail.

Method 1: Set a password for the current account

First of all, let's figure out how to set a password for the current profile, that is, for the account under which you are currently logged into the system. You do not need administrator rights to perform this procedure.

1. Click "Start" and go to "Control Panel".



2. Now move to .



3. In a group "User Accounts" click on the name "Change Windows Password".



4. In this subsection, click on the very first item in the list of actions - “Creating a password for your account”.



5. The window for creating a code expression opens. It is here that we will carry out the main actions to solve the problem posed in this article.



6. In the field « New Password» Enter any expression that you will use to enter the system in the future. When entering a code expression, pay attention to the keyboard layout (Russian or English) and case ( Caps Lock ). This makes a big difference. For example, if, when logging into the system, the user uses a symbol in the form of a small letter, although he initially specified a capital letter, the system will consider the key incorrect and will not allow him to log into the account.

   Of course, it is more reliable complex password, written using various types characters (letters, numbers, etc.) and in different registers. But it should be taken into account that hacking an account, if the attacker stays near the computer for a long time, will not be difficult for a person with the proper knowledge and skills, regardless of the complexity of the code expression. This is more protection from home and idle onlookers than from hackers. Therefore, there is no point in specifying a particularly complex key from an alternation of arbitrary characters. It’s better to come up with an expression that you yourself can remember without any problems. In addition, we should not forget that you will have to enter it every time you log into the system, and therefore it will be inconvenient to use very long and complex expressions.

   But, naturally, a password that is too obvious for others, for example, consisting only of your date of birth, should also not be set. Microsoft recommends following these rules when choosing a code expression:

   • Length from 8 characters;
   • Must not contain username;
   • Must not contain a complete word;
   • Must be significantly different from previously used encodings.



7. In the field "Password Confirmation" you need to re-enter the same expression that you specified in the previous element. This is because the characters are hidden as you type. Therefore, you may mistakenly enter the wrong character and thereby lose control of your profile in the future. Re-entry is intended to protect against such absurd accidents.



8. To the region you need to enter an expression that will remind you of the key in case you forget it. This element is not required to be filled out and, naturally, it makes sense to fill it out only when code word is a meaningful expression, not an arbitrary set of characters. For example, if it consists entirely or partially of certain data: the name of a dog or cat, mother’s maiden name, date of birth of a loved one, etc. At the same time, you should remember that this prompt will be visible to all users who try to log in under this account. Therefore, if the hint too obviously points to the code word, then it is better to refuse its use.



9. After you have entered the key twice and optionally a hint, click on "Create password".



10. The password will be created, as evidenced by the new status next to your profile icon. Now, when you log in, you must enter the key in the welcome window to log into your password-protected account. If on this computer If only one administrator profile is used and there are no other accounts, then without knowledge of the code expression it will be impossible to start Windows at all.

Method 2: Set a password for another profile

At the same time, sometimes it becomes necessary to set passwords for other profiles, that is, those user accounts under which you are not currently logged in. To password protect someone else's profile, you must have administrative rights on that computer.

1. To begin, as in the previous method, go from "Control Panels" to subsection "Change Windows Password". In the window that appears "User Accounts" click on position "Manage another account".



2. A list of profiles on this PC opens. Click on the name of the one to which you want to assign a password.



3. A window opens "Account Change". Click on the position "Create a password".



4. Almost exactly the same window opens that we saw when creating the login code expression for the current profile.



5. Just as in the previous case, in the area "New Password" enter the code expression in the area "Password Confirmation" repeat it, and in the area "Enter a password hint" add a hint if desired. When entering all this data, follow the recommendations that have already been given above. Then click "Create password".



6. A code expression for the other account will be created. This is what the status says "Password protected" near its icon. Now, after turning on the computer and selecting this profile, the user will need to enter a key to log into the system. It is also worth noting that if it is not you yourself who is working under this account, but another person, then in order for him not to lose the ability to access his profile, you must give him the created keyword.

As you can see, creating a password on a PC with Windows 7 is not difficult. The algorithm for performing this procedure is extremely simple. The main difficulty lies in selecting the code expression itself. It should be easy to remember, but not obvious to others who have potential access to the PC. In this case, starting the system will become both safe and convenient, which can be organized by adhering to the recommendations given in this article.

If there is a question about whether or not to install protection on your computer, then the answer should be obvious. Who would like it if their personal information on their computer became available to everyone? Moreover, even relatives can come up and inadvertently disable important programs and services. To protect yourself not only from the actions of intruders, but also from banal and absurd accidents, it is better to set your Windows password once and for all.

It is also possible to set a special code combination for each user. This way no one will be offended, and everyone will have their own installation of the operating system with the required programs. Setting a password is a standard procedure that increases the security of each computer system. It is enough to read any manual, and you will immediately discover that setting passwords is the very first setting that the computer owner must create.

Settings

So, in order to put some entry code in Windows 7, you need to perform certain actions. There is nothing complicated about this, it’s just that an untrained eye is unlikely to be able to figure out what’s what. It's great that the Internet is full of instructions.

• First you need to open the Start menu and go to Control Panel. This menu is opened by clicking the icon at the bottom left of the screen or the Win button on your keyboard, which is indicated by Windows tiles.

• A list will open containing many system settings. Let's scroll through these items and find Adding and deleting user accounts. Click on this item and look further.

A special window will appear here, listing all users of this computer. Click on the character for which you need to create a password. In the case where several people use the computer, each person needs to create their own password.

A list of actions that can be performed on a specific user account will open. You need to hover your mouse over the Create a password field and click on it.

The new menu will prompt you to enter the password in special Windows 7 fields several times so that no errors are detected. It is important to include a hint that the system will ask if the user accidentally forgets the password. After this procedure, click Create password and wait.

That's all, I succeeded in password-protecting Windows. Now, after the next download, a special window will appear that will invite the user to enter the key. As you know, if you set such a restriction on logging into the system, there are no simple methods to bypass it. Of course, it is possible to make this window reset from booting via USB with the Linux operating system. But this is only possible for advanced guys who can at least install Linux on a memory card. – this is the most reliable setting for safe and correct work in the computer field.

(Visited 236 times, 1 visits today)

Please note: To follow most of the instructions in this article, you must use a local Windows account with administrator rights.

How to set a password on a Windows computer

If other people have access to your computer, it is wise to protect Windows with a password. This way, your settings and data will be safe: without special knowledge, no one will be able to view or change them. Windows will ask for a password when you turn on the computer, when you change account or after resuming from sleep mode.

1. Open Start → Settings (gear icon) → Accounts → Sign-in options.
2. Click "Add" under "Password".
3. Fill in the fields according to the system prompts and click “Finish”.

How to set a password on Windows 8.1, 8

1. In the right sidebar, click Settings (gear icon) → Change PC settings. In the menu of the window that opens, select “Accounts” (or “Users”), and then “Login Options”.
2. Click on the " " button.
3. Fill out the fields, click “Next” and “Finish”.

How to set a password on Windows 7, Vista, XP

1. Open the section “Start” → “Control Panel” → “User Accounts”.
2. Select the desired account and click “Create a password” or immediately click “Create a password for your account.”
3. Fill in the fields using the system prompts and click on the “Create password” button.

If strangers do not have physical access to your computer, it may be better to disable protection. This will eliminate the need to enter a password every time the system starts.

1. Use the Windows + R key combination and enter command line netplwiz(or control userpasswords2, if the first command does not work). Press Enter.
2. In the window that opens, select in the list the account for which you want to remove the password, and uncheck the box next to “Require username and password.” Click OK.
3. Enter the password, confirm it and click OK.

Windows will stop asking for a password only when you turn on the computer. But if you lock the screen ( Windows keys+ L), if you log out or the computer goes into sleep mode, a password request will still appear on the display.

If the “Require username and password” option is unavailable or you want to completely remove it rather than disable it Windows password, try another method for more experienced users.

To do this, open the account management section using one of the instructions at the beginning of this article.

If the open section says that you are using a Microsoft online profile (sign in with email and password), disable it. Then use the system prompts to create a local profile, but do not fill out the password fields during the process.

After account deactivation Microsoft system will stop synchronizing your settings and files on different computers. Some applications may refuse to work.

If the local profile is initially active in the account management menu, then simply change the current password, leaving the fields for the new password empty.

If you delete an old password, the system will never prompt you for it until you add a new one.

How to remove the password when resuming from sleep mode

If you disable the password prompt when Windows startup, the system may still prompt you for it when you wake up. But you can deactivate this feature separately using these instructions.

1. In the search bar in Windows, enter “Power Options” and click on the link found to the section with the same name. Or find it manually through the Control Panel.
2. Click "Require a password when you wake up," then "Change settings that are currently unavailable" and check the "Don't ask for a password" checkbox.
3. Save your changes.

How to remove password when waking up Windows XP

1. Open the “Control Panel” → “Power Options” section.
2. In the window that appears, open the “Advanced” tab and uncheck the box next to “Require a password when exiting standby mode.”
3. Save your changes.

If you have forgotten your password and cannot log into your local Windows administrator profile, there is no need to reinstall the OS. There is a simpler solution: resetting the password protection. To do this, you will need another computer, a USB drive, and a free password reset utility.

Create a bootable USB flash drive on another PC

1. Download the Lazesoft Recover My Password installer on any available computer.
2. Run the downloaded file and complete the installation.
3. Connect the flash drive to your computer. If necessary, make a copy of the files stored on it, since all information will have to be deleted.
4. Open Lazesoft Recover My Password, click Burn Bootable CD/USB Disk Now! and create bootable USB flash drive using program prompts.

Boot your computer using a flash drive

1. Insert the prepared USB drive into the computer for which you have forgotten the password.
2. Turn on (or restart) the PC and, as soon as it starts to boot, press the key to go to the BIOS settings. Usually this is F2, F8, F9 or F12 - depending on the equipment manufacturer. Most often, the required key is displayed on the screen while loading the BIOS.
3. While in BIOS menu, go to the Boot section if the system does not redirect you there right away.
4. In the Boot section, install the USB flash drive to the first place in the list of devices that appears on the screen. If you don't know how to do this, look around - there should be some control tips nearby.
5. Save your changes.

If the BIOS is also protected by a password that you do not know, then you will not be able to reset the password Windows protection using Lazesoft Recover My Password.

Perhaps instead of the classic BIOS you will see a more modern one GUI. Moreover, even in various older versions BIOS settings may vary. But in any case, the procedure will be approximately the same: go to the Boot menu, select the desired USB drive as the source and save the changes.

After this, the computer should boot from the flash drive on which the Lazesoft Recover My Password utility is recorded.

Reset your password with Lazesoft Recover My Password

1. Select Lazesoft Live CD (EMS Enabled) and press Enter.
2. Reset your account password using Lazesoft Recover My Password tips.
3. Reboot.

After these steps, Windows will stop prompting you Old Password, and you can set a new one according to the instructions at the beginning of the article.