It’s hard to hear me on iPhone 7. It’s hard to hear from the person I’m talking to on IPhone

Can't hear iPhone conversation partner 7 or is the sound too quiet? The reasons for the defect are as follows:

● the speaker volume during a conversation is reduced to a minimum;
● the device is in “Mute” mode;
● the headset was removed incorrectly;
● signal quality cellular communication;
● the front speaker is clogged;
● firmware bug;
● the front speaker is damaged;
● speaker cable defect;
● codecs are faulty or PCB.

Why can't you hear your interlocutor on iPhone 7 | 6S?

You can’t hear your iPhone 10 interlocutor, but the day before you used headphones? If you disconnect the headphones from your phone incorrectly, your phone will continue to operate in headset mode. In this case, you will not hear anything through the front speaker. To resolve this issue, reconnect and remove the headset correctly, or restart your phone.

Often the reason for poor hearing lies in the quality of your operator's signal. I can't hear the person I'm talking to on my iPhone 6S? Try switching to speakerphone. If nothing has changed, it's probably not the phone's fault, but the operator's. You can completely dispel doubts by listening to any audio file, switching the sound through the front and rear speakers. Any complaints about the sound quality? Contact your operator's office.

The next thing you can check yourself is whether the speaker is clogged with dirt. While in pockets and bags, the device is constantly in contact with lint and dust. This may be the reason why you cannot hear your interlocutor on your iPhone. The solution is to clean the front speaker.

Can't hear your interlocutor on iPhone 7 | 7 Plus periodically, the defect appears and disappears? The reason may be the way iOS works. To fix it, you will have to reinstall or update the operating system.

Falls or moisture getting under the phone case are the main causes of device breakdowns. In case you can’t hear your interlocutor iPhone 7 | 8 | X, the speaker, its cable, and in the worst case, the printed circuit board may be damaged. An experienced technician will be able to accurately determine the repair required in a particular case after visual inspection phone. In the best case, it will be enough to restore the contacts of the speaker cable; in the worst case, replacement motherboard or phone to a new one.

A telephone is, first and foremost, a communication device, despite many additional functions. If it is difficult to hear through an iPhone, such a malfunction can lead to serious problems for the owner and his interlocutor. Audibility may deteriorate or disappear completely for several reasons.

Some of them can be dealt with without the involvement of specialists, but most often you have to contact a service center. We will determine what reasons lead to deterioration of hearing, and tell you how you can deal with them.

Reasons why it’s hard to hear when talking on an iPhone

If you can't hear your interlocutor through your iPhone, the first thing you need to do is check your phone settings. It is possible that the speaker volume is at a minimum. Despite its simplicity, the case is quite common.

Another reason is that the speaker hole is clogged. If you carried your phone in your pocket without a case, the hole could become clogged with dust or lint from clothing. Any dirt can be removed with a soft brush, after which audibility can be restored. A common cause of phone problems is careless handling. If you follow the operating rules, repairs will be required extremely rarely.

Sometimes problems with hearing are associated with a malfunction of the headset. In this case, the gadget will recognize the headphones even if they are not connected, so the sound level will be reduced. When you can't hear your interlocutor through your iPhone, insert the headphones and then take them out. The sound in the speakers may be restored, but this indicates a malfunction of the phone, so it’s still worth contacting a specialist.

If it’s hard to hear through your iPhone and simple ways do not help fix the problem, most likely you will have to change the top speaker. It is impossible to restore its functionality: it is a cast part, not a collapsible part, so it will not be possible to clean this element. The replacement will not take much time, and after it the audibility will be excellent.

Add volume

Let's start with the banal. Inexperienced users simply turn down the volume of the speaker during a conversation by involuntarily pressing the volume down button on the side panel. In this case, you don’t even need to open the iPhone 6 settings. To set the maximum volume, you need to call someone and, during the call, use the side keys to increase the volume.

Judging by messages on various forums, a simple action helps many users: inserting and removing the headset. If it helps, then that's great, but if not, then move on.

Shipping film and covers

Another reason: shipping film. After buying a new smartphone, there is always a film on the screen that for some reason people don’t remove. They do this supposedly in order to preserve the beautiful appearance, but this film may simply block the speaker, making it difficult to hear the interlocutor.

Cases can also block the sound. They usually have a hole for the speaker, but it sometimes gets clogged with debris. Try cleaning it and test your phone again.

Cleaning the speaker mesh

If the mesh that covers the membrane and serves as some kind of protection against debris could become clogged, then to clean it, you need to use a cotton swab with alcohol or a toothbrush. Also try blowing it out and removing the debris.

If cleaning helps, that's great. True, dirt accumulates not only outside, but also inside. Therefore, sometimes the phone needs to be disassembled to clean out debris from under the mesh.

For disassembly, special star-type screwdrivers are used. Most likely, you do not have them, so you will have to contact a service center. If necessary tool Yes, you can try to remove the cover yourself. But do it carefully so as not to touch or tear off the cable.

Did it help? If not, then we will look for the reason.

Looking for a reason

It is important to remember why it became difficult to hear the interlocutor on the iPhone 6. For example, after the gadget falls out of your hands or you spill a glass of water on it. It is possible that sand got into the speaker after relaxing on the beach. Anything could disrupt its operation, but most often it is the owner who is to blame. Speakers themselves rarely deteriorate. After all, this is a simple module in which there is nothing special to break.

Unfortunately, only a few users can repair their iPhone 6 on their own. This cannot be done without special screwdrivers, so the simplest, laconic advice is to take the phone to a service center.

Moreover, if you remember for sure that the speaker began to work worse after the fall, then you don’t have to rush too much. However, if you are sure (or at least there is such a possibility) that you determined the bad sound on the iPhone 6 after water got inside the case, then you must immediately turn off the phone, remove the battery and take the device to a service center. In this case, this is the minimum that you can do useful. The maximum is if you also dry the phone with a hairdryer for at least 5-10 minutes. Surely during this time the water will evaporate from the inside. After that, still take the phone to the technician.

If it turns out that water got inside and shorted the contacts, you will have to install a new speaker on the iPhone 6. Usually it is inexpensive, but if you pay for the work it will not be so cheap. It also cannot be ruled out that some contact or cable did not come off during the fall. In this case, repairs will not be expensive.

Could there be a software problem?

Maybe. On my own operating system iOS is great. It is well optimized, easy to use, and constantly updated. But nowadays many users have popular jailbreaks. This special programs installed on iOS. In other words - firmware.

Yes, they open up many opportunities for users, including the ability to install cool free programs, for which without jailbreak you would have to pay money. But firmware is unofficial software, and no one is responsible for its performance. You shouldn’t be surprised that after some kind of jailbreak it will become difficult to hear your interlocutor on the iPhone 6. And although the problem in the software can be solved quite easily, a similar feature does occur.

So it is not recommended to install all sorts of complex software that can harm the system unless absolutely necessary. It’s good if the problem with the speaker is software in nature. In this case, iPhone 6 repair will not be required at all. It will be enough to simply install the latest official software through iTunes.

By the way, it is extremely rare that there may be a problem even in official firmware. There have been cases when new versions of Apple software only harmed the phone. Therefore, you can try to “roll back” to previous version BY. It's unlikely that this will solve the problem, but it's worth a try.

If all else fails

If you remove the jailbreak and install the official one software did not help and you are still hard to hear the interlocutor on the iPhone 6, then you will have to contact a service center or, if there is no guarantee, some private workshop.

Well, as a last resort, just use a wired headset (it always comes with your phone) or a Bluetooth headset, and also communicate via speakerphone.

More than six months have passed since the release of new products from Apple. At this point, our partner, the ModMac service center, has repaired more than two hundred devices and is ready to talk about the main iPhone problems 7 and iPhone 7 Plus and the cost of work to fix them.

"Sound from the Trumpet"

During a conversation, the interlocutor hears your voice greatly distorted, a “trumpet” effect appears. This problem is usually solved in three ways:

– Reset settings (free);
– (4,990 rubles);
– Go to the official Apple service center and try to register this case as a warranty case (free of charge).

"Endless Questions"

When transferring backup copy Various minor problems appear from the old iPhone, “endless questions” pop up that appear after a certain time, even if they are answered. The solution will be to “hard reset” the iPhone or reset the settings, and you can do all this yourself and absolutely free.

New iPhone activation fails

Just imagine - you just bought the long-awaited iPhone 7, you are trying to start using it, but, alas, activating the phone takes several hours.

The solution was found after many such requests: try activating the device through different Internet providers (connecting to different Wi-Fi networks) - it has been proven that activation will take place on two out of five possible connections!

Problems with the Home button

– The Home button randomly fires and goes into constant pressing mode (continuous operation of the Taptic Engine). You can contact the official Apple service center and try to fix this case as a warranty case (free of charge);

– The button gets very hot, and at some point the glass on it breaks. Unfortunately, Apple does not recognize this case as a warranty, so you will need to do the repair yourself.

Peeling iPhone 7 and 7 Plus case in Jet Black

New color- new problems, and if everyone has more or less come to terms with scratches, then paint peeling off in chunks is something new! There have already been several cases where the integrity of the paint layer was compromised to such an extent that the bare aluminum case was exposed.

After the Apple service center refuses to exchange it under warranty, all that remains for the user is to accept it or buy a new one for 12,990 rubles.

iPhone 7 and 7 Plus camera glass

Already in the second week of use, scratches appear on the camera, some are small and not scary, while others have the entire length of the eye, and this is not just a hindrance, but annoying. But the fact that the glass may break after the phone falls due to the “bulging” camera is a completely different problem. (glass) will cost the owner of an iPhone 7 6,990 rubles, and .

Small problems to deal with

– Slow operation iPhone cameras 7. Imagine - you are walking down the street and notice something unique - something that you will never see a second time, take your phone out of your pocket as quickly as possible, lightly swipe into the camera and... that's it - wait about 20 seconds until everything interesting events around will end.

– Problems with headphones with a Lightning connector. The sound is distorted until you pull the wires; interference, which makes listening to music simply impossible.

- The sound of the engine running. If you bring the back of the iPhone 7 to your ear, you will hear something wheezing inside. So, this is just new processor.

Unfortunately, in these cases, going to the official Apple center is unlikely to bring positive results.

On the ModMac website you can familiarize yourself with all types of services and.!

Have you noticed that during some calls on your iPhone you can’t hear the other person? This problem quite common among owners Apple smartphones. Its cause may be either an iOS error or a malfunction or contamination of the iPhone receiver. What to do in any of these cases is described in this instruction.

Check volume and connection levels

First you need to check basic settings. First, make sure that the volume level during a call is not set to the minimum value. During a call, adjust the volume using the control buttons - the screen should display a volume indicator and its current status.

Secondly, make sure that the headset is not connected to the iPhone, since in this case there will be no sound in the smartphone receiver. Make sure that nothing is connected to the headphone jack or dock connector, and that there is no . In addition, go to the menu " Settings» → Bluetooth and turn off Bluetooth.

Clean the receiver

The iPhone receiver may not work properly if it is dirty or clogged. Make sure that the receiver is not blocked by anything, such as a protective film or cover, and check that the receiver grille is not clogged. In the latter case, you need to clean it with a clean, dry brush with soft bristles.

Advice! If you just purchased an iPhone, remove the plastic films from the panels of the smartphone.

Force restart your iPhone

Quite often, the problem with poor iPhone receiver performance is due to a software error. Force reboot your smartphone by holding down the buttons Nutrition And Home(volume down button on iPhone 7/7 Plus) in order to clear errors.

Restore iPhone

An even more effective way to fix a software error is iPhone recovery. To do this:

Note: You must have the latest version installed on your computer. iTunes version. You can update iTunes on a Mac from the Updates tab in the Mac App Store, or on Windows from the Help → Updates menu. If iTunes is not installed on your computer, you can download the latest version from official Apple website.

Step 1. Download the latest version for your iPhone version iOS on this site .

Step 2. Connect your iPhone to your computer, and then enter the smartphone into recovery mode. To do this, simultaneously hold down the buttons Home And Nutrition on 10 seconds, then release the Power button but continue to hold the button Home for 6-9 seconds. If you did everything correctly, iTunes will report that it has detected your iPhone in recovery mode.

Note: Putting iPhone 7 and iPhone 7 Plus into recovery mode is slightly different. Instead of the Home button, you should hold the Volume Down button.

Step 3: Hold the key Shift and while holding it press " Restore» on iTunes. In the window that opens, select the previously downloaded firmware file.

Step 4. Confirm to start the recovery procedure.

After the restoration is complete, perform the initial iPhone setup, and then check whether the error with the incorrect operation of the device’s receiver has been corrected.

Contact the service center for help

If none of the methods described above helped, in your case the problem is hardware. Only service center specialists can help solve it.