The first thing that owners of a newly purchased D-Link DIR-300 router are interested in immediately after connecting it is configuration issues wireless network wifi After all, this is why you buy the device. A wifi network is quite enough to provide Internet access to all gadgets in the apartment. If previously family members had conflicts over access to the Internet, then with the purchase of the D-Link DIR-300 all their worries will melt away like smoke. But this will happen only after we correctly configure the wireless connection on the D-Link DIR-300 wifi network. In addition to setting up this service, the router also supports other communication technologies, such as VPN. The admin panel of the router has options corresponding to them. But we will not touch on these issues here. We are only interested in wifi!
Like other settings of the D-Link DIR-300 router, wireless network settings are carried out via the web interface. You can access it from a browser on the computer to which the device is directly connected. We will consistently describe all the steps necessary to organize full support for a wireless network in a confined space in your home. Read carefully and repeat after us.
Assigning a network name
Our first wifi setup on the D-Link DIR-300 router will be to assign a network name. To begin, let's do the following:
- In the menu on the left, select “Wi-Fi” -> "General settings"..
- In the panel on the right, check the box "Turn on wireless connection». .
- Set the “MBSSID” option to “Disabled”. .
Let's move on to actually setting up the router's network name. To do this:
- Go to the “Wi-Fi” menu -> "General settings"..
- In the “SSID” field, enter the name of the future D-Link DIR-300 network. It should be typed in the Latin alphabet - no Russian letters! By this name you will search for a network among others.
- Field "Channel".- \ assign the “Auto” mode. . This parameter is usually adjusted when communication interference occurs. If wifi is not working very well, then try playing with this value.
- Set the “Wireless mode” field to “B/G/N Mixed”. . If you work with a laptop or use a smartphone, you can set the value “G Only” here - this will allow the system to work at the limit of its capabilities.
Assigning access rights
Routers like the D-Link DIR-300 provide a signal not only within your home, but also a little further away. If you live in an apartment building, then the signal from your device will reach neighboring apartments, and maybe spread further.
If there are particularly cunning people among your neighbors, they can easily steal your traffic. In this case, the speed of your Internet connection will decrease as much as your neighbor’s speed will increase.
Distributing traffic to family members is one thing, but sharing it with strangers and not very decent people is quite another. Therefore, the next Wifi setup on the D-Link DIR-300 that we will do will concern restricting access to your router from outsiders. Only those who know the password will be able to connect to the system.
We sequentially perform the following manipulations:
- We launch the browser on the computer and enter the IP address of our device into the address bar: http://192.168.0.1.
- In the menu on the left, select “Wi-Fi” -> "Security Settings"..
- "Network authentication" set to “WPA-PSK/WPA-2-PSK mixed”. .
- Enter any desired password in the field "PSK encryption key.". Do not assign a password that is too primitive, like “123” - such wifi can easily be hacked.
Here, in fact, are all the minimum settings required to organize a wireless network based on the D-Link DIR-300 router. If something doesn't work, then the reason lies somewhere other than basic settings. We will look at some problems of this kind for the D-Link DIR-300 router below.
Hello! In this article we will connect the D-link DIR-615 router. I will show this model as an example, but the instructions are suitable for all D-link routers: DIR-300, DIR-320, etc. Let’s look at the process of connecting the router. Let's connect power, internet, and computer via cable or wireless Wi-Fi network. I will provide links to instructions for entering the router settings and setting up Wi-Fi, Internet, etc. Simply put, you can connect and configure a new D-link router yourself.
This is what the D-link DIR-615 router looks like when you just bought it:
You may have a different model, it doesn't matter. The main thing is that we need to connect it all correctly. If you connect it incorrectly, you will hardly be able to configure the router, let alone use it.
We need:
- Connect power to the router
- If the indicators do not light up, turn on the power using the button on the device
- Connect your computer, tablet, phone to the router. Can be done via cable or Wi-Fi
- Connect the Internet to the D-link router. Cable from an Internet provider, or from an ADSL modem
- Go to the settings of our router and configure it.
Let's look at everything in more detail.
Connecting a D-link router to a computer and provider
First, take the power adapter and connect it to your router. Then, plug it into a power outlet. If the router does not turn on, then turn on the power using the button on the router itself. Next, if you want to connect the router to a computer or laptop via a network cable (it’s best to configure via cable), then take network cable, which comes with the router, and use it to connect a laptop or computer. We connect one end of the cable to the network connector on the computer, and the second connector to the LAN connector on the router. On D-link routers, LAN connectors are usually black. They are signed LAN. Like this:
You can also connect via Wi-Fi network. Just turn on the router and a new Wi-Fi network will appear that you can connect to. You may find it useful in connecting your laptop to a wireless network.
If you have connected your computer to the router, and you see the connection status on the computer: “Without Internet access”, or “Limited” and the Internet does not work, then this is normal, because we have not even connected the Internet to our D-link and have not configured it yet .
Connecting the Internet to D-link
Most likely, you just have a cable from your provider or an ADSL modem in your house. In the first case, we take a cable from the Internet provider and connect it to the WAN connector of the router. It is on D-link DIR-615 - yellow. If you have Internet via a modem, then we also connect the cable from the modem to the WAN connector on the router.
Most likely, even after connecting the Internet cable, the Internet on the computer (or other device you connected) won't work. This is because you need to configure the router to work with your Internet provider. I wrote about this in the article: .
You need to go to the router settings, here, and configure it. If you have connected everything correctly, but cannot enter the settings, then look at the article. The main thing is that you need to choose the right connection type and set the necessary parameters that your Internet provider uses. Then the Internet through the router will start working. Also, set up a wireless network, and .
It is best to configure the router according to detailed instructions. We have one like this. But, using her example, you can configure other D-link routers. Look, perhaps I have already added detailed articles on other models. See the section Setting up a router - D-link, or ask in the comments.
A D link router, like other similar routers, is used to create a wireless network through which other wi-fi devices connect to the Internet or local network. To do this, it requires a wired Internet connection via a modem.
Users with little experience may have some difficulties connecting a wi-fi router to Windows OS. D link, in comparison with other router manufacturers, has a more convenient system of router configuration settings, thanks to which, even those who are very far from computer technology people will be able to configure it correctly.
In terms of price-quality ratio, d link devices occupy a leading position in the wi-fi router market. In general, this company specializes in the development and production network equipment, so its leadership in this area is well deserved.
One of the factors determining the choice by users of equipment produced by a given company is a large selection alternative firmware, significantly increasing productivity. High-quality support for its products also determines the buyer’s choice in favor of d link wi fi router devices.
Installation and connection
So, you are the happy owner of a d link router.
First, let's unpack the device. In addition to the router itself, the kit should contain a pair of cables for connecting to the Internet and Ethernet connection. How to connect a d link router and configure it?
To connect a d link wi fi router, you need to do the following:
Instructions, power supply, patch cord, CD, router
- We connect an Ethernet cable to the DSL modem, its other end is connected via the WAN port to the router itself.
- We connect the PC to the router with the second Ethernet cable; for this you can use any Ethernet port of the router.
- The basic configuration of the router is configured using the web interface. In the browser, type the following in the address bar: 192.168.0.1
- On the page that opens, you will be required to create a username and password for it. It’s easier to use the “Admin” login and leave the password field empty.
- We press enter, a window appears in which the configuration of the d link router is configured.
To set up a D-link router and wireless network security system, you need to do the following:
- Change the password for accessing the administrative menu. This is done in the “Tools” menu. In it, select the “Admin” tab, in which we enter the password.
- Next, we will need to temporarily disable the wireless network.
- The next step is to enable wireless network data protection (WEP protocol). This is done in the “Home” – “Wireless” – “OpenSystem” tab. Enable “WEP” and set the security key to “128 Bit”. We set the key type to “ASCII”; in the field for the first key you need to enter a password. In order to increase the level of security, you need to change the SSID. This is located in the same tab. After completing these steps, save the settings.
A considerable number of users are doubtful about the WEP security protocol. In such cases, preference is given to the latest, advanced developments, for example WPA and WPA II. The latter will provide maximum protection for your wireless network. You can configure WPA II as follows. Open the “Wireless Security Mode” tab and click on enable the corresponding function.
You will need to determine the encryption algorithm. This is done in the “WPA Personal” window. The “AES” algorithm is considered the most progressive, for this reason it is better to choose it. After this, the type is selected. For home use, the most acceptable type is PSK, which requires entering a password on all connected devices. The EAP type is used by corporate users and is better protected. Essentially, it is a combination of different methods.
MAC address filtering is configured as follows:
1. Go to the configuration settings window, then go to the advanced settings tab, where we select “Filters”
2. Select a MAC filter, set a list of PC addresses connecting to your wireless network.
Setting up a d link 2540u router
First you need to configure the TCP/IP protocol on your PC. For this, on WINDOWS example XP, open the Start menu - Settings - Control Panel - Network Connections.
- IP address: 192.168.1.2
- Subnet mask: 255.255.255.0
- Default Gateway: 192.168.1.1
- Preferred DNS Server: 195.34.31.50
- Alternate DNS server: 62.112.106.130
Save and exit.
After making sure that the device is correctly connected to the PC, open the browser and enter into the address bar: 192.168.1.1. A page will appear on which you will need to enter your username and password. After these data have been entered, click OK.
We hope that the material presented in this article will help you install the d link router and configure it correctly.
The D-Link DIR-300 router has a point on board Wi-Fi access 802.11n and allows you to organize a wireless network at home, through which mobile gadgets can access the Internet and access each other’s files. Correct setting router not only helps to avoid hacking home network“craftsmen”, but also allows you to significantly increase the Wi-Fi speed and increase the coverage area of the D-Link DIR-300.
After connecting the D-Link DIR-300 router to the provider’s network, you can configure Wi-Fi, set a password and distribute the Internet to wireless devices. The access point can be configured in three ways:
- Using the “Wireless Network Setup Wizard”;
- Manual setting of parameters;
- Automatically, via WPS protocol.
Quick setup
The DIR-300 provides configuration using the “Wizard”. This method requires minimal effort and allows you to set up a Wi-Fi network in seconds without diving into technical details.
To establish a connection, you need to log into the router’s web interface and select the “Wireless Network Setup Wizard” section. Depending on the firmware, the “Master” may be located in different places interface, but all options and menu items in different versions of the software have the same name. Procedure for the “Master”:
Set the network mode to “Access Point”.
Enter the access point name - the name of the Wi-Fi network, which will be displayed on all connected devices. For security reasons, it is not recommended to leave the default name “DIR-300”.
Select the “Secure Network” item and create a password that the router will request from connected devices.
After following these simple steps and applying the changes, Wi-Fi setup using the “Wizard” will be completed and the D-Link DIR-300 will be completely ready for use.
Manual setting
Unlike quick setup, manual configuration allows you to take into account the characteristics of connected devices and neighboring networks, which allows you to improve throughput and reception quality.
Basic manual setting Wi-Fi networks for home use on the DIR-300 are performed in 2 stages:
- Setting basic network parameters;
- Configure security settings.
Basic settings
The main wireless network parameters are located in the router control panel on the “Wi-Fi – Basic Settings” tab. To go to this item in the “dark gray” interface, you will need to switch to advanced mode.
Description of functions:
- The “Enable Wireless Connection” option controls the access point’s power. In order for devices to use a WiFi connection, the checkbox must be checked.
- Disabling Wi-Fi network broadcasting without deactivating the radio module may be necessary when using the DIR-300 in client mode. If you uncheck this box in standard mode, then wireless communication between the router and all devices will be interrupted.
- The MBSSID and BSSID parameters are configured when the router is used to simultaneously serve several wireless networks. At home, such a scenario is unlikely, and if there is only one network, these parameters cannot be changed.
- If you check the “Hide access point” checkbox, the WiFi network name will no longer be displayed both on other people’s devices and on trusted ones. In this case, the router will not stop broadcasting. To establish a new client connection, you will need to enter the SSID manually. This function implemented in D-Link DIR-300 to ensure security.
- The selection of the channel can be entrusted to the router firmware, leaving the value “auto”, but the automatic setting is not always adequate, which often leads to a drop in the wireless speed of the router. To manually select the correct channel, you need to evaluate the performance of neighboring Wi-Fi networks. In the “light” air interface of the D-Link DIR-300, when selected, a histogram appears showing the channel load.
The less loaded the channel, the higher the throughput, and therefore the wireless transmission speed. To study the situation in more detail, you can use one of free programs, for example, WiFi-Analyzer.
Security Settings
Professional hackers are hunting for corporate secrets and are unlikely to be interested in hacking into someone's home access point. But there are amateurs who can “harmlessly” pick up a password in order to use the “free” Internet or connect to the webcam of someone else’s computer. Therefore, you should not neglect basic safety rules.
Wireless network security settings are located in the router control panel on the “WiFi – Security Settings” tab. To go to this item in the “dark gray” interface, you will need to switch to advanced mode.
Description of functions:
- A network authentication method that excludes the objective possibility of hacking - WPA2. In corporate Wi-Fi networks, access is used through a RADIUS server, and for a home network, a preset PSK password key is suitable. Thus, WPA2-PSK mode will provide maximum protection.
- The encryption key is the same password that must be entered on the WiFi device in order to connect to the D-Link DIR-300. Complex password and correct setting - the most important conditions network security. The password cannot be set to simple numeric or dictionary combinations, or your date of birth. Good password contains more than 8 characters: numbers, special characters and letters, case sensitive. Regardless of the complexity, finding the key is only a matter of time, so it is recommended to change the password to a new one every month.
- AES – data encryption technology. Provides key encryption strength without reducing wireless transmission speed, making it well suited for use in the 802.11n standard. The update period should be left at its default value of 3600 seconds.
- Pre-authentication through adjacent access points is only used in complex networks with multiple routers.
After completing these steps and applying the changes, the Wi-Fi security setup will be completed and the D-Link D-300 will be ready to operate securely.
Connecting using WPS
The WPS protocol was developed to simplify Wi-Fi network setup. For the user, the essence of the technology is that the router is paired with any WPS-compatible TV, smartphone or tablet without having to enter a password: when you press a button on the router, the devices exchange a digital access code and connect automatically.
Depending on the hardware revision of the router, the button may be located on the side or back of the case.
Brief instructions for connecting to D-Link DIR-300 via WPS using an Android device as an example:
Select the “WPS Button” option.
Press the WPS button on the DIR-300 case.
After a few seconds, a successful connection message will appear.
Thus, in just 4 simple steps You can connect any WPS-compatible device to the router and you won’t need to enter any password.
Despite the convenience this method pairing, the WPS protocol has the lowest security: when exchanging identification packets between devices, a digital code is used that can easily be picked up by spyware.
Additional features
- The MAC filter in D-Link DIR-300 is an auxiliary means of protection against unauthorized Wi-Fi connections. Allows you to configure both black and whitelists MAC addresses.
- “List of WiFi clients” displays up-to-date information about connected devices. The function allows you to forcefully disconnect any user from your home network.
- The “WPS” tab provides access to simplified device pairing options.
- On the " Additional settings“You need to pay attention to 2 important parameters: “TX power” and “Channel width”.
Transmitter power is expressed as a percentage. The higher it is, the wider the Wi-Fi network coverage area.
The channel width can be selected automatically - 20/40, or adjusted manually. The wider the channel, the greater the throughput, i.e. speed.
The 40 MHz channel gives a noticeable increase in speed, but is less resistant to interference from neighboring networks than 20 MHz. In addition, as you approach the edge of the coverage area, the throughput of the 40 MHz channel is greatly reduced. To improve reception, you will need to configure the D-Link DIR-300 transmitter to maximum power, but then the router will begin to emit too much radio waves, which will “clog” weak waves from the antennas of mobile gadgets. This will significantly reduce wireless transmission speeds on devices operating in close proximity to the router. Thus, it is possible to select the optimal values of power and channel width only by measuring the speed and coverage directly at the installation site of the DIR-300.
- The values of the remaining parameters on the “Advanced Settings” tab are not recommended for users who do not have special knowledge.
- WMM – WiFi-Multimedia technology optimizes wireless traffic for multimedia applications. To improve speed performance while watching online videos or calling on Skype, the option must be enabled. It is not recommended to change parameter values.
- In “Client” mode, DIR-300 can connect to another router to organize complex infrastructure in large homes or offices, as well as when connected to a provider’s Wi-Fi network.
Found a typo? Select the text and press Ctrl + Enter
