Using automatic selection of tires and wheels for the car Mazda 6, you can avoid many problems associated with their compatibility and compliance with automaker recommendations. After all, these components have a huge impact on whole line operational characteristics of the vehicle, ranging from handling to dynamic qualities. In addition, tires and rims in a modern car are one of the active safety elements. That is why it is extremely important to approach their choice very responsibly, using quite specific knowledge about these products.
Unfortunately, or, conversely, fortunately, a significant part of car enthusiasts prefer not to study technical device own car thoroughly. This situation makes automatic system selection is an extremely useful tool that prevents you from making the wrong choice when purchasing tires and rims. And it is distinguished by its extreme diversity, thanks to the presence in the Mosavtoshina online store of a wide range of this type of product.
Mazda 6 tire and wheel sizes: Let's study together. Mazda 6 gh tire size
Mazda 6 tires and wheels: Learning to choose the right ones
When choosing new wheels for a Mazda 6, the size of tires and wheels plays a major role. After all, a specific car model has its own tire and wheel sizes. In addition to the standard wheels recommended by the manufacturer, there are alternative sizes available.
Mazda 6 I GG
We recommend choosing Mazda 6 tires of the appropriate size from the list in the owner's manual for each model year. Rubber of the wrong size can have negative consequences: the load on the wheel bearings and suspension parts increases. In addition, the car’s handling, fuel consumption, comfort and safety depend on what tires are installed on the Mazda 6.
Additional Information
To select Mazda 6 wheels, you need to know the basic parameters, such as tire size - width, profile height, load capacity index, speed index, and wheel characteristics - diameter, width, offset, number of fasteners, diameter of the circle on which they are located.
If you're shopping around for alternative tire sizes, a tire calculator can help you visually compare tire and wheel sizes, ground clearance, and vehicle speed on the new wheels.
Mazda 6 GG, years of production: 2002 – 2008.
- Center Hole Diameter (DIA): 67.1mm;
- Fastening to the hub: nut;
- Thread: M12 x 1.5.
Tire
The table shows the possible tire sizes, speed and load indices, as well as the recommended tire pressure for the Mazda 6 GG.
| Size | Load index | Speed index | Pressure, kgf/cm² |
| 195/65R15 | 91 | V | 2.2 |
| 205/60R16 | 93 | V | 2.2 |
| Replacement | |||
| 205/55R16 | 91 | V | 2.2 |
| 205/55R16 | 91 | V | 2.2 |
| 215/45R17 | 91 | W | 2.2 |
| 215/50R17 | 91 | V | 2.2 |
| 215/50R17 | 91 | W | 2.2 |
| 215/45R18 | 89 | W | 2.4 |
| 225/45R18 | 91 | W | 2.2 |
Disk
| Size | Departure | Sverlovka |
| 6Jx15 | ET50 | 5×114.3 |
| 6.5Jx16 | ET55 | 5×114.3 |
| Replacement | ||
| 6.5Jx16 | ET55 | 5×114.3 |
| 7Jx16 | ET55 | 5×114.3 |
| 7Jx17 | ET55 | 5×114.3 |
| 7Jx17 | ET60 | 5×114.3 |
| 7Jx17 | ET60 | 5×114.3 |
| 7Jx18 | ET55 | 5×114.3 |
| 7.5Jx18 | ET60 | 5×114.3 |
Mazda 6 II GH
205 – tire width. The indicator is calculated as the distance between the outer boundaries of the side surfaces of the inflated tire without taking into account the protective belts. Measured in millimeters.
60 is the height of the tire profile, which is measured as a percentage of the width. What does it mean? To find the height, you need to calculate 60% of 205 mm. Thus, the tire height is: 205 X 0.6 (60%) = 123.0 mm
R stands for radial tire. From the English word Radial, which means radial type of tire. This is a method of arranging rubber and metal cord during production. Of course, you can also find the letter D - diagonal, but such tires have now practically disappeared from production.
16 is the diameter of the hole in the rubber, or on which disk this rubber can be mounted, that is, the diameter of the disk. This size is always indicated in inches!
The diameter of the disc cannot be larger or smaller than the diameter of the wheel; you simply won’t fit it. That is, if the tires are 16 inches (406.4 mm), then the rim should be 16 inches (406.4 mm)!
Additional Information
Mazda 6 GH, years of production: 2007 – 2012.
- Fastening to the hub: nut;
- Thread: M12 x 1.5.
Additional information indicated in the markings on the sidewall of the tire:
- XL or Extra Load is a reinforced tire, the load index of which is 3 units higher than that of conventional tires of the same size.
- M+S or M&S (Mud + Snow) - mud plus snow - winter and all-season tires.
- All Season, AW (Any Weather) or AS - all-season tires
- The pictogram * (snowflake) means that the rubber is intended for use winter conditions. If there is no this marking on the sidewall of the tire, then this tire is intended for use only in summer conditions.
- Aquatred, Aquacontact, Rain, Water, Aqua or pictogram (umbrella) - special rain tires.
- Outside and Inside are asymmetrical tires; during installation, it is important not to confuse which side is outer and which is inner. When installing, the inscription Outside should be on the outside of the car, and Inside should be on the inside.
- Rotation or arrow - this marking on the sidewall of the tire indicates the directional tread pattern of the tire. When installing a tire, you must strictly observe the direction of travel.
- Tubeless - tubeless tire. If this inscription is absent, the tire can only be used with a tube. Tube Type - means that this tire must be used only with a tube.
Tire
Disk
Mazda6 III GJ
Regardless of the method of production of disks - cast, forged, stamped, there is a standard marking of disk sizes.
Let's look at the main parameters of Mazda 6 GJ - 7.5Jx17 5x114.3 ET 50 wheels.
7.5 - rim width in inches. Converted to millimeters it turns out to be 190.5 mm.
J - symbol indicates certain design features- the shape of the edges of the disk and serves only for information.
17 is the mounting diameter of the rim in inches, which exactly matches the mounting diameter of the tire.
5x114.3 - PCD (Pitch Circle Diameter) or drilling in Russian. Here, the number 5 indicates the number of mounting holes for the nuts, and 114.3 is the diameter of the circle (PCD) in millimeters on which they are located.
ET 50 - departure at of this disk positive and is 50 mm. Disc offset (or offset) is the distance between the mating plane of the wheel disc and the middle of the wheel rim. The mating plane is the surface that presses the wheel rim against the vehicle hub.
Additional Information
Additionally, the disc marking for Mazda 6 GJ, 2012-2015 may indicate the following information:
- DIA D 67.1 - diameter of the central hole in mm. In an ideal situation, this size corresponds to the landing diameter of the hub. On many manufactured alloy wheels, for greater versatility and applicability to various car brands, the diameter of the central hole DIA is made larger. In this case, the hub fit diameter is smaller than the disc DIA, and then it is necessary to use a special centering fit ring (adapter ring).
- MAX LOAD - designation of the maximum load on the wheel (indicated in pounds or kilograms).
- SAE, TUV, ISO - an analogue of our GOST, the regulatory body. Indicates the standard to which the marking of this wheel corresponds.
Tire
Disk
Mazda Mazda6 III GL
Years of production: since 2015.
Additional Information
- Fastening to the hub: nut;
- Thread: M12 x 1.5.
Tire
Disk
The tire and wheel markings contain a lot of necessary information; it is important to be able to understand it. Without this information, you will not be able to choose the right tires for your car; they simply will not fit in size. There are special signs on the car body with recommendations for tire sizes, just read them and go to the store for new ones. However, such signs are not always available, and you have to determine the size of Mazda 6 tires yourself!
imazda.ru
Marking of tires and wheels Mazda 6 - Tires and wheels
Maybe someone will find it useful:Basic designations rim. Wheel (disc) marking:
The wheel rim marking looks like 7Jx17 ET=60 PCD=5x114.3 DIA=67.1
1. ET=60 - departure. May be 10 mm less than standard and depends on the width of the rim. The smaller the offset, the wider the wheelbase. 2. 17 - wheel rim size (diameter) in inches. May be different for the same vehicle and depends on the size of the tire being mounted. 3. DIA=67.1 - hub hole diameter in mm. 4. PCD=5x114.3 - number and diameter of location (in mm) of mounting holes. Must fully comply with the standard. 6. 7J - wheel width in inches (in this case 5). May be different for the same vehicle and depends on the size of the tire being mounted. J - indicates the presence of one shoulder. Taken from here.
Parameters of original disks on M6: R16: 6.5Jx16 ET=55 PCD=5x114.3 DIA=67.1;R17: 7Jx17 ET=60 PCD=5x114.3 DIA=67.1;R18: 7.5Jx18 ET=60 PCD= 5x114.3 DIA=67.1.
Basic symbols on the tire. Tire marking:
1. Trademark of the tire MATADOR, name of the manufacturer. 2. Designation according to the UTOG rule, i.e. tread wear resistance in %%, adhesion coefficient value A, B, C, fatigue strength A, B, C. 3. Tubeless type - tubeless tire. Possibly the designation Tube Type - chamber tire. 4. Certification mark (CP) with an approved number in accordance with EEC No. 30. 5. Data on maximum load capacity and maximum air pressure. 5. Form number. 7. Tire profile height as a percentage of the tire width. 8. Tire section width in mm. 9. "R" - radial tire design, possibly also "-" diagonal tire design or "B" diagonally belted tire design. 10. Load capacity index. Table for decoding load capacity indices.11. Speed index. Speed index decoding table. 12. Tire tread designation. 13. Brand of tire with this tread. 14. The inner diameter of the tire corresponds to the diameter of the wheel rim in inches. 15. Availability of tire tread wear indicator. 16. Data on the number of cord layers in the sidewall and tread of the tire. 17. Direction of rotation. (Only if the tire has a directional or directionally asymmetrical tread pattern). Taken from here.
Tire parameters for M6: R16: 205/60 R16; R17: 215/50 R17; R18: 225/45 R18.
To select compatible sizes, you can use a tire calculator. Selection of wheels with visualization here
mazdaclub.cc
Mazda 6 gh tire size
Where to see the tire size on a car and how to choose the tire size (Tips from RDM-Import)
Changing wheels on a Mazda 6 or what happened to low-profile tires
Wheel assembly mazda 6 gh
Wheels for Mazda part 1
Which tires to choose: choosing the right tires (advice from RDM-Import)
mazda 6 tires
Tires removed from Mazda 6
Square wheels Mazda 6/ Mazda 6
Headlight range control rod Replacement. A simple and cheap alternative.
Mazda 6 GH pulls to the right
Also see:
- Sportage Kia characteristics
- Daewoo Leganza timing marks
- Review of Chevrolet Orlando video
- Technical characteristics of Honda Dio 27
- How to remove the starter for Renault Megane 2
- Audi 80 b3 wheel bolt pattern
- Skoda Kodiak length
- Mazda 3 wiper size
- Chevrolet Niva diagram
- Opel minivans the lineup
openstone.ru
 Tires and wheels for Mazda 6 Other Mazda models: Mazda 121, Mazda 2, Mazda 3, Mazda 323, Mazda 5, Mazda 6, Mazda 626, Mazda 929, Mazda Atenza, Mazda Axela, Mazda Axela Speed, Mazda AZ Offroad, Mazda AZ Wagon , Mazda AZ-1, Mazda AZ-3, Mazda B-Series, Mazda Biante, Mazda Bongo, Mazda Bongo Brawny, Mazda Bongo Friendee, Mazda Bongo Van, Mazda Bravo, Mazda BT-50, Mazda Capella, Mazda Carol, Mazda Clef , Mazda Cronos, Mazda CX-3, Mazda CX-5, Mazda CX-7, Mazda CX-9, Mazda Demio, Mazda Efini MS-6, Mazda Efini MS-8, Mazda Efini MS-9, Mazda Efini RX-7 , Mazda Eunos 100, Mazda Eunos 300, Mazda Eunos 500, Mazda Eunos 800, Mazda Eunos Cargo, Mazda Eunos Cosmo, Mazda Eunos Presso, Mazda Familia, Mazda Flair, Mazda Flair Crossover, Mazda Flair Custom Style, Mazda Flair Wagon, Mazda Flair Wagon Custom Style, Mazda Lantis, Mazda Laputa, Mazda Luce, Mazda Mazda2, Mazda Mazda3, Mazda Mazda3 MPS, Mazda Mazda5, Mazda Mazda6, Mazda Mazda6 MPS, Mazda Mazda8, Mazda MazdaSpeed 3, Mazda MazdaSpeed 6, Mazda Millenia, Mazda Millenia S , Mazda MPV, Mazda MX-3, Mazda MX-5, Mazda MX-5 Miata, Mazda MX-6, Mazda Premacy, Mazda Proceed, Mazda Proceed Levante, Mazda Proceed Marvie, Mazda Protege, Mazda Protege5, Mazda Revue, Mazda Roadster , Mazda Roadster RF, Mazda RX-7, Mazda RX-8, Mazda Savanna RX-7, Mazda Scrum, Mazda Scrum Truck, Mazda Scrum Wagon, Mazda Sentia, Mazda Spiano, Mazda Tribute, Mazda Verisa,
Selection of tires and wheels for Mazda 6Using automatic selection of tires and wheels for your Mazda 6, you can avoid many problems associated with their compatibility and compliance with automaker recommendations. After all, they have a huge impact on a significant part of the vehicle’s operational properties, primarily on handling, fuel efficiency and dynamic qualities. In addition, one cannot fail to note the importance of tires and rims as active safety elements. That is why the choice between them should be made as responsibly as possible, which presupposes the presence of a whole range of knowledge about these products. Unfortunately, most car owners prefer not to go into such technical nuances. This situation makes the automatic selection system an extremely useful tool in preventing you from making the wrong choice when purchasing tires and rims. And it is very wide, which is due to the diversity of the range of such products presented in the Mosavtoshina online store. |
mosautoshina.ru
Mazda 6 2008 dimensions
Wheel and rim sizes for Mazda Mazda6 2008
By car By tire size By wheel size
Acura Alfa Romeo Alpine ARO Aston Martin Audi Bentley BMW BMW Alpina Bugatti Buick BYD Cadillac ChangAn Chery Chevrolet Chrysler Citroën Dacia Daewoo Daihatsu Datsun Dodge Dongfeng DS Eagle FAW Ferrari Fiat Fisker Force Ford Geely GEO GMC Great Wall Hindustan Holden Honda Hummer Hyundai Infiniti Isuzu Iveco JAC Jaguar Jeep Jinbei Kia Lamborghini Lancia Land Rover Lexus Lifan Lincoln Mahindra Maruti Maserati Mazda Mercedes-Benz Mercury MG MINI Mitsubishi Mosler Nissan Oldsmobile Opel Panoz Perodua Peugeot Plymouth Pontiac Porsche Proton Ram Ravon Renault Renault Samsung Rover Saab Saleen Saturn Scion Seat Skoda Smart SsangYong Subaru Suzuki Tata Tesla Toyota Vauxhall Volkswagen Volvo ZAZ VAZ GAZ Lada TagAZ UAZ 115 125 135 145 155 160 165 174 175 185 190 195 200 205 215 220 225 235 240 245 255 265 275 285 29 5 305 315 320 325 330 335 345 355 365 / R 10 12 13 14 15 16 16.5 17 18 19 20 21 22 24
The highlighted entries mean factory sizes, the rest are replacement options
USDM Modifications
All trims
Years of production: 2006–2008
Generation: II (GH) Power: 177 hp | 132 kW | 179 PS Engine: l4, diesel Central hole diameter: 67.1 mm Thread: M12 x 1.5 Fastening type: nut Years of production: 2008–2012
EUDM modifications
1.8 2.0 2.2 2.5
Generation: II (GH) Power: 118 hp | 88.3 kW | 120 PS Engine: l4, petrol Central hole diameter: 67.1 mm Thread: M12 x 1.5 Fastening type: nut Years of production: 2008–2012
Generation: II (GH) Power: 145 hp | 108.1 kW | 147 PS Engine: l4, petrol Central hole diameter: 67.1 mm Thread: M12 x 1.5 Fastening type: nut Years of production: 2008–2012
Generation: II (GH) Power: 182 hp | 136 kW | 185 PS Engine: l4, diesel Central hole diameter: 67.1 mm Thread: M12 x 1.5 Fastening type: nut Years of production: 2008–2012
Generation: II (GH) Power: 168 hp | 125 kW | 170 PS Engine: l4, petrol Central hole diameter: 67.1 mm Thread: M12 x 1.5 Fastening type: nut Years of production: 2008–2012
2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002
Tire and wheel sizes for Mazda Mazda6, 2002-2017
Home/Car brands/Mazda/Mazda6The parameters of tires and wheels may vary depending on the power and engine size, as well as on the vehicle configuration
Additional Information
- Years of production: 2002 - 2008
- Center Hole Diameter (DIA): 67.1mm
- Fastening to the hub: Nut
- Thread: M12 x 1.5
Load index
Speed index
Pressure
Sverlovka
195/65R15
205/60R16
6.5Jx16
Replacement options
205/55R16
205/55R16
215/45R17
215/50R17
215/50R17
225/45R18
215/45R18
7Jx18 
Additional Information
- Years of production: 2007 - 2012
- Center Hole Diameter (DIA): 67.1mm
- Fastening to the hub: Nut
- Thread: M12 x 1.5
Load index
Speed index
Pressure
Sverlovka
205/60R16
205/60R16
Replacement options
215/50R17
215/50R17
When choosing new wheels for a Mazda 6, the size of tires and wheels plays a major role. After all, a specific car model has its own tire and wheel sizes. In addition to the standard wheels recommended by the manufacturer, there are alternative sizes available.
Mazda 6 I GG
We recommend choosing Mazda 6 tires of the appropriate size from the list in the owner's manual for each model year. Rubber of the wrong size can have negative consequences: the load on the wheel bearings and suspension parts increases. In addition, the car’s handling, fuel consumption, comfort and safety depend on what tires are installed on the Mazda 6.
Additional Information
To select Mazda 6 wheels, you need to know the basic parameters, such as tire size - width, profile height, load capacity index, speed index, and wheel characteristics - diameter, width, offset, number of fasteners, diameter of the circle on which they are located.
If you're shopping around for alternative tire sizes, a tire calculator can help you visually compare tire and wheel sizes, ground clearance, and vehicle speed on the new wheels.
Mazda 6 GG, years of production: 2002 – 2008.
- Center Hole Diameter (DIA): 67.1mm;
- Fastening to the hub: nut;
- Thread: M12 x 1.5.
Tire
The table shows the possible tire sizes, speed and load indices, as well as the recommended tire pressure for the Mazda 6 GG.
| Size | Load index | Speed index | Pressure, kgf/cm² |
| 195/65R15 | 91 | V | 2.2 |
| 205/60R16 | 93 | V | 2.2 |
| Replacement | |||
| 205/55R16 | 91 | V | 2.2 |
| 205/55R16 | 91 | V | 2.2 |
| 215/45R17 | 91 | W | 2.2 |
| 215/50R17 | 91 | V | 2.2 |
| 215/50R17 | 91 | W | 2.2 |
| 215/45R18 | 89 | W | 2.4 |
| 225/45R18 | 91 | W | 2.2 |
Disk
| Size | Departure | Sverlovka |
| 6Jx15 | ET50 | 5×114.3 |
| 6.5Jx16 | ET55 | 5×114.3 |
| Replacement | ||
| 6.5Jx16 | ET55 | 5×114.3 |
| 7Jx16 | ET55 | 5×114.3 |
| 7Jx17 | ET55 | 5×114.3 |
| 7Jx17 | ET60 | 5×114.3 |
| 7Jx17 | ET60 | 5×114.3 |
| 7Jx18 | ET55 | 5×114.3 |
| 7.5Jx18 | ET60 | 5×114.3 |
Mazda 6 II GH
205 – tire width. The indicator is calculated as the distance between the outer boundaries of the side surfaces of the inflated tire without taking into account the protective belts. Measured in millimeters.
60 – tire profile height, which measured as a percentage of the width. What does it mean? To find the height, you need to calculate 60% of 205 mm. This gives the tire height: 205 X 0.6 (60%) = 123.0 mm
R stands for radial tire. From the English word Radial, which means radial type of tire. This is a method of arranging rubber and metal cord during production. Of course, you can also find the letter D - diagonal, but such tires have now practically disappeared from production.
16 — the diameter of the hole in the rubber, or on which disk this rubber can be mounted, that is disk diameter. This size is always indicated in inches!
The diameter of the disc cannot be larger or smaller than the diameter of the wheel; you simply won’t fit it. That is, if the tires are 16 inches (406.4 mm), then the rim should be 16 inches (406.4 mm)!
Additional Information
Mazda 6 GH, years of production: 2007 – 2012.
- Fastening to the hub: nut;
- Thread: M12 x 1.5.
Additional information indicated in the markings on the sidewall of the tire:
- XL or Extra Load is a reinforced tire, the load index of which is 3 units higher than that of conventional tires of the same size.
- M+S or M&S (Mud + Snow) - mud plus snow - winter and all-season tires.
- All Season, AW (Any Weather) or AS - all-season tires
- The pictogram * (snowflake) means that the tire is intended for use in winter conditions. If there is no this marking on the sidewall of the tire, then this tire is intended for use only in summer conditions.
- Aquatred, Aquacontact, Rain, Water, Aqua or pictogram (umbrella) - special rain tires.
- Outside and Inside are asymmetrical tires; during installation, it is important not to confuse which side is outer and which is inner. When installing, the inscription Outside should be on the outside of the car, and Inside should be on the inside.
- Rotation or arrow - this marking on the sidewall of the tire indicates the directional tread pattern of the tire. When installing a tire, you must strictly observe the direction of travel.
- Tubeless - tubeless tire. If this inscription is absent, the tire can only be used with a tube. Tube Type - means that this tire must be used only with a tube.
Tire
| Size | Load index | Speed index | Pressure, kgf/cm² |
| 205/60R16 | 93 | V | 2.2 |
| 205/60R16 | 92 | V | 2.2 |
| Replacement | |||
| 215/50R17 | 91 | V | 2.2 |
| 215/50R17 | 91 | W | 2.2 |
| 225/45R18 | 91 | W | 2.2 |
| 225/45R18 | 91 | V | 2.2 |
Disk
| Size | Departure | Sverlovka |
| 6.5Jx16 | ET55 | 5×114.3 |
| 6Jx16 | ET50 | 5×114.3 |
| Replacement | ||
| 7Jx17 | ET60 | 5×114.3 |
| 7Jx17 | ET60 | 5×114.3 |
| 7.5Jx18 | ET60 | 5×114.3 |
| 7.5Jx18 | ET60 | 5×114.3 |
Mazda6 III GJ
Regardless of the method of production of disks - cast, forged, stamped, there is a standard marking of disk sizes.
Let's look at the main parameters of Mazda 6 GJ wheels - 7.5Jx17 5x114.3 ET 50.
7.5 - rim width in inches. Converted to millimeters it turns out to be 190.5 mm.
J - the symbol indicates certain design features - the shape of the edges of the disk and serves only for information.
17 is the mounting diameter of the rim in inches, which exactly matches the mounting diameter of the tire.
5x114.3 - PCD (Pitch Circle Diameter) or drilling in Russian. Here, the number 5 indicates the number of mounting holes for the nuts, and 114.3 is the diameter of the circle (PCD) in millimeters on which they are located.
ET 50 - the offset of this disc is positive and is 50 mm. Disc offset (or offset) is the distance between the mating plane of the wheel disc and the middle of the wheel rim. The mating plane is the surface that presses the wheel rim against the vehicle hub.
Additional Information
Additionally, the disc marking for Mazda 6 GJ, 2012-2015 may indicate the following information:
- DIA D 67.1 - diameter of the central hole in mm. In an ideal situation, this size corresponds to the landing diameter of the hub. On many manufactured alloy wheels, for greater versatility and applicability to various car brands, the diameter of the central hole DIA is made larger. In this case, the hub fit diameter is smaller than the disc DIA, and then it is necessary to use a special centering fit ring (adapter ring).
- MAX LOAD - designation of the maximum load on the wheel (indicated in pounds or kilograms).
- SAE, TUV, ISO - an analogue of our GOST, the regulatory body. Indicates the standard to which the marking of this wheel corresponds.
Tire
Disk
Mazda Mazda6 III GL
Years of production: since 2015.
Additional Information
- Center Hole Diameter (DIA): 67.1 mm;
- Fastening to the hub: nut;
- Thread: M12 x 1.5.
Tire
Disk
The tire and wheel markings contain a lot of necessary information; it is important to be able to understand it. Without this information, you will not be able to choose the right tires for your car; they simply will not fit in size. There are special signs on the car body with recommendations for tire sizes, just read them and go to the store for new ones. However, such signs are not always available, and you have to determine the size of Mazda 6 tires yourself!
When choosing a wheel for a Mazda car, special attention should be paid to the parameters of the wheels and tires. For each passenger car model, Japanese manufacturers use separate standard sizes. For example, the factory equipment of the Mazda 6 requires the use of 195/65/R15 tires. As an alternative, you can use tires 205/50/R17, 205/60/R15, 225/40/R18, 225/35/R19.
Wheel size for Mazda 6 I GG
- increased load on the hub bearings;
- loss of aerodynamic performance;
- reducing the vehicle's directional stability.
In addition, indicators such as fuel consumption, handling and safety when driving a car also depend on the choice of wheel sizes.
Before choosing a wheel for a Japanese car, you need to study its parameters:
- tire width;
- profile height;
- speed and load capacity indices;
- tire pressure;
- diameter;
- departure;
- number of fastening elements;
- types of fasteners;
- circle parameters;
- centering hole.
When choosing non-standard sizes wheels, you can use a tire calculator. This device is capable of selecting the optimal sizes of wheels and tires, the wheel load index, taking into account the vehicle speed and ground clearance.
Wheel sizes for Mazda 6 version GG 2002-2008:
- thread diameter: 5.
Tire size for Mazda 6 GG
We present a table where we indicate the wheel load indices, speeds, sizes and tire pressures on the GG version.
| Wheel load index | Tire parameters | Tire pressure kg/cm² | Speed index |
| 91 | 195/65/R15 | 2.2 | V |
| 93 | 205/60R16 | 2.2 | V |
| Replacement | |||
| 91 | 215/45/R17 | 2.2 | V |
| 91 | 215/50/R17 | 2.2 | V |
| 89 | 215/45/R18 | 2.2 | W |
| 91 | 225/45/R18 | W | |
Wheels for Mazda 6 GG
| Size | Disc offset | |
| 5×114.3 | 6Jx15 | ET50 |
| 5×114.3 | 6.5Jx16 | ET55 |
| Replacement | ||
| 5×114.3 | 6.5Jx16 | ET55 |
| 5×114.3 | 7Jx16 | ET55 |
| 5×114.3 | 7Jx17 | ET55 |
| 5×114.3 | 7Jx17 | ET60 |
| 5×114.3 | 7Jx17 | ET60 |
| 5×114.3 | 7Jx18 | ET55 |
| 5×114.3 | 7.5Jx18 | ET60 |
Wheel size for Mazda 6 II GH
- 205 indicates the width of a car tire. This indicator is measured in millimeters and is determined by calculating the distance of the side edges of the inflated tire. This does not take into account protective belts;
- 60 shows the profile height of the tire, measured as a percentage of the width of the tire. Thus, to determine the height, you need to know the ratio of 205 mm to 60%. As a result, we calculate the profile height: (60%/100%)X 205= 123 mm;
- R indicates the radius of the tire. Translated from in English Radial – the radius of a car tire. Thus, manufacturers combine rubber and cord when creating a tire. The letter D was also used to designate radiality. However, tires with this designation are practically no longer produced;
- 16 indicates the diameter of the wheel centering hole for which a car tire can be used. This indicator is indicated in inches.
Mazda 6 GH 2007-2012 model year:
- center hole diameter DIA: 67.1 mm;
- hub fastening element: nut;
- thread: M12x5.
Additional information indicated on the side of the tire:
M&S (Mud and Snow) translated from English: mud and snow: off-season and winter tires;
XL (Extra Load) reinforced tire with a wheel load index that is 3 units higher than conventional tires of similar sizes;
AW or AS off-season tires;
Symbol * indicates that the tire is intended for use in winter. If this marking is not indicated on the side of the tire, then the tire is used only for the summer period;
Inside, Outside– inner and outer side of an asymmetric tire. Accordingly, when installing a wheel, the Inside sign should be located on the outside of the tire, and the Outside sign on the inside of the tire;
Water, Rain, Aquatred, Aqua or an umbrella-shaped symbol indicates rain tires;
Tubeless inscription- tubeless tire. If there is no inscription, this means that the tire is used with a tube. Tube Type indicator – the tire is installed only with a tube;
Arrow or inscription Rotation shows the direction of the tread pattern. Indicated on the side of the tire.
Wheel size for Mazda 6 III GJ
For the Mazda 6 III GJ, standard wheel size markings are used, as for other Japanese car models.
Before choosing a wheel product, you need to study the standard parameters of the factory-fitted rim 7.5×17 5×114.3 ET50 for the GJ version, where:
- 7.5 shows its width in inches;
- the symbol J indicates the design, the shape of the edges;
- the number 17 indicates the diameter of the disc seat. This indicator must correspond to the same parameters of the tire;
- 5×3 – PCD disc bolt pattern. The number 5 indicates the number of holes for fastening the nuts, 114.3 indicates the diameter of the PCD circle;
- The ET50 marking indicates a disc offset of 50 mm. The offset is the distance from the mating plane of the car disk to the middle of the wheel rim. The area where the wheel rim is pressed against the car hub is called the mating plane.
The following information is attached to the markings of rims for Mazda GJ 2012-2015:
The Max Load inscription indicates the maximum permissible load on the wheel;
ISO, TUV, SAE – classification standards for determining disk quality, similar to GOST. For each product, one or another quality standard is indicated;
Center hole diameter DIA: 67.1 mm. This indicator should correspond to the hub landing diameter. For casting, manufacturers use a large centering hole. So that the wheels can be universal for all types of cars.
However, in this situation, the hub fit diameter and DIA are different from each other. Therefore, it is recommended to use a centered adapter ring as a connecting element.
The correct choice of wheel size also depends on the ability to determine the markings of the wheel and tire. If the car owner does not know the marking designation, then the selected tires or wheels may not be suitable in size.
Wheel sizes for Mazda 6 III GL
The Mazda 6 version GL has been produced since 2015. Wheel parameters:
hub fastening element: nut;
thread M12x1.5;
Tires for Mazda III GL
Wheels for Mazda III GL
Please note that the drilling or bolt pattern indicates the fit of the wheel rim diameter. In the car's operating instructions, Japanese manufacturers indicate PCD, the bore diameter.
On Mazda cars of 3 different versions and editions, the same wheel bolt pattern is used: 5 × 114.3. Thus, this drill determines that the disk is attached with 5 bolts and its diameter is 114.3 mm.
Mazda 3 wheel size
| Diameter, R | Tire size | Disc offset, ET | Disc width, J | |
| 5×114.3 | R15 | 195/65/15 | 45-55 | 66.57.0 |
| 5×114.3 | R16 | 205/55/16 | 40-5540-5542-55 | 6.577.5 |
| 5×114.3 | R17 | 205/50/17215/45/17225/45/17 | 42-5545-5548-52 | 77.58 |
| 5×114.3 | R18 | 215/45/18225/40/18215/40/18 | 42-5542-5545-52 | 77.58 |
| 5×114.3 | R19 | 225/35/19225/35/19 | 45-5548-52 | 7.58 |
| 5×114.3 | R20 | 225/35/20 | 45-48 | 7.5 |
The wheel parameters for Mazda 3 I and II editions are almost identical. The differences are that the second version of the car has higher arches.
Thus, on the Mazda 3 II BL you can mount wheels with an offset of 35 and a width of 8. The standard parameters are 16.17-inch wheels with a diameter of 6.5 mm.
Wheels for Mazda 3 2013, III generation BM
| Drilling (PCD, bore diameter) | Diameter, R | Tire size | Disc width, J | Disc offset, ET |
| 5×114.3 | R16 | 205/60/16 | 6..5 | 50 |
| 5×114.3 | R17 | 205/50/17 | 7, 7.5 | 52.5 |
| 5×114.3 | R18 | 215/45/18 | 7, 7.5 | 50 |
| 5×114.3 | R19 | 215/35/19 | 8 | 50 |
| 5×114.3 | R20 | 235/30/20 | 8.5 | 45 |
Factory wheel sizes for Mazda 3 with hatchback and sedan body types from 2013-2017 are 16, 18 inches, depending on the configuration. Tires with standard sizes are installed: 215/45/R18, 205/60/R16.
Tire pressure on Mazda 3
When using R16 tires with a load of up to 3 passengers, the pressure of the front and rear wheels should be 2.5 bar. With a load of up to 5 passengers, the rear tire pressure is 3.2 bar and the front tire pressure is 2.8 bar.
R18 tires with a load of up to 3 passengers should have a pressure of 2.4 bar for the front wheels and 2.3 for the rear tires. Full load up to 5 passengers - rear tire pressure 3 bar and front tire pressure 2.8 bar. Similar information is indicated in the operating instructions for the Mazda 3 III generation.
How to determine the drill yourself?
Method for determining wheel rim bolt pattern:
- the number of fasteners (bolts) is calculated based on the holes located on the disk. For example, Mazda 3 has 5 holes in the disc;
- the calculation includes determining the distance between the inner walls of the holes and adding to the resulting value of their diameter.
For example, having determined the number of bolts and the diameter of the holes, the car owner gets the value 5 × 114.3 for Mazda 3.
An exception may be 18-inch wheels for Mazda 3 with a front drive axle and a 2.0 engine capacity, as well as versions with all-wheel drive and a power of 2.5 liters.
Wheel size for Mazda CX5
All trim levels of the Mazda CX5, starting from 2012, use 17 and 19-inch alloy and steel wheels marked 17x7J ET50, 19x7J ET50:
- ET – disc offset 50 mm;
- 7J – rim width;
- the diameter of the centering hole is 67.1 mm and 5 holes for fastening bolts around the circumference of the disk 114.3 mm; PCD 5x3.
The Mazda CX5 can be equipped with wheels with non-standard parameters (-+0.5) inches.
Tires for Mazda CX5
If you use factory wheels of 17, 19 inches, then for the CX5 model tires with the following sizes are selected: 225/55/R19/ 99 V, 225/65/R17/ 102 V. Marking designation:
- 225 – tire width;
- 55.65 – tire profile height;
- 99.102 – load capacity index from 750 to 850 kg;
- V – wheel speed index up to 240 km/h;
- R – radial tire design.
If you choose tires based on the load capacity index, then you need to take into account the fact that the estimated weight per person is 75 kg. As a last resort, you can calculate the number of passengers and install tires with a high load capacity.
The car wheel rim is attached to the hub assembly and is a regular flywheel. To secure the disk, the Mazda 6 bolt pattern is important. The wheel is driven by the energy generated by the engine. To rotate a wheel of greater mass, it is necessary to expend more energy, and, accordingly, more fuel. When a heavy wheel stops, the load on the vehicle's braking system increases. Therefore, many factors, such as comfort, controllability, safety and efficiency, depend on the correctly selected parameters of wheels for Mazda 6.
Wheel parameters for Mazda 6
- The PCD bolt pattern, that is, the number of holes for fastening and the diameter of the circle on which they are located, is 5 × 114.3 mm.
- The diameter of the center hole DIA is 67.1 mm.
- Standard disc fastening nut is 12×1.5 mm.
The width, diameter and offset of the disc may vary depending on the year of manufacture and modification.
Original alloy wheels Replica Mazda 6 are designed specifically for this Mazda model and meet all recommended parameters. Exclusive design of five twin beams with different shapes brings out the dynamic and vibrant appearance car.
What you need to remember
Therefore, it can be difficult to visually distinguish a PCD bolt pattern if the difference is 1-2 mm. Often a 5x112 disk is installed instead of a 5x114.3. But even such a “penny” difference will not make it possible to tighten all the nuts completely. As a result, the disc will not fully seat on the hub, and vibration and self-unscrewing of the nuts will occur during movement. Don't believe your eyes, pay attention to the markings!
CO diameter (DIA) is the diameter of the central hole of the disk. Measured from the side of the disc adjacent to the hub. For Mazda 6 this figure is 67.1 mm. The diameter of the central hole must match the landing diameter of the hub. Precise mating of the two parts ensures centering of the wheel rim and relieves the brake disc from vibrations. This is important because, according to reviews from Mazda 6 GJ owners, standard brake discs tend to overheat and deform.
Manufacturers of universal alloy wheels often make the central hole of a larger diameter, and for specific model The vehicle requires the installation of a centering ring for installation on the hub.
Disc width
The rim size must match the tire size. And if the diameter of the disk and the diameter of the tire coincide, then difficulties arise with the width. The wheel markings indicate the width in inches, and the tire width in mm. When selecting, you need to recalculate or refer to the tables for matching tire and wheel sizes. The seat width of a Mazda 6 to 7-inch wheel corresponds to a tire width from 200 to 225 mm.
Departure
Disc offset ET is the distance in millimeters from the vertical plane of symmetry of the disc to the plane adjacent to the hub. Usually the disc offset is a positive value, but in some cases the disc offset can be zero or negative. The offset affects the wheelbase of the car, since the distance between the wheels depends on it.
Mazda 6 rims have a positive offset, for example, ET 50.
Diameter
The diameter is indicated in inches and exactly corresponds to the tire diameter. The recommended diameter of Mazda 6 wheels is from 16 to 19″.
Type
Modern wheel rims are made of the following types:
- Standard steel wheel. A budget option with a large unsprung weight. The discs have low corrosion resistance and durability. The advantage is maintainability.
- Light alloy wheel. They are made of light alloys, have an attractive appearance and are not subject to corrosion. According to the production method, they are divided into cast and forged. Alloy wheels burst when they hit a large hole; forged wheels can withstand stronger impacts.
Sverlovka
Disc drilling or bolt pattern, the designation PCD (Pitch Circle Diameter) determines the diameter of the circle in mm along which the holes for mounting the disc are located and the number of these holes. For Mazda 6, the standard is 5 holes with a diameter of 114.3 millimeters.
In conclusion, a couple of tips:
- Even if you think that all the technical parameters are clear to you, it is still better to buy wheels for Mazda 6 after consulting with professionals. This will save you from extra costs and will add safety on the roads.
- Choose discs from trusted manufacturers. No copy can compare with the quality of the original Mazda 6 Replica disc.
